Kinova 4-DOF MICO Blocks
|
The Joint Control Robot - 4 DOF is a 4-DOF robotic arm with a 2-finger gripper module at the end of the arm. QUARC interfaces to the Joint Control Robot - 4 DOF via two RS-485 channels, allowing open-architecture control of the robot."
|
| Kinova 4-DOF MICO Read | Reads the Joint Control Robot - 4 DOF joint angular positions, speeds, currents, torques and states. |
| Kinova 4-DOF MICO Write | Writes joint and finger position commands to the Joint Control Robot - 4 DOF. |
| Kinova 4-DOF MICO Torque Reset | Resets the torque sensor measurement to 0 on the Joint Control Robot - 4 DOF. |
Copyright ©2024 Quanser Inc. This page was generated 2024-10-17. Submit feedback to Quanser about this page.
Link to this page.
This blockset requires a customized 4-DOF MICO or JACO (Gen2) robot from Kinova explicitly for use with QUARC. For support regarding this
robot please contact your regional sales manager.