Error Codes :: QUARC Targets

navigation bar

Error Codes

All the functions provided in QUARC that return an error use the error codes defined in the header file quanser_errors.h. These error codes should be accessed by their symbolic name rather than their value because their value may be subject to change or may differ across operating systems. A textual error message corresponding to a given error code may be obtained in C code using the msg_get_error_message function.

While these interfaces are generally sufficient, there may be instances in which there is a need to look up an error code. This help page provides a table listing all the error codes used by QUARC at the time this version was generated, in numerical order.

Error Codes in Numerical Order

Error Code	Symbolic Name	Description
1	QERR_OUT_OF_MEMORY	Not enough memory to perform the operation.
2	QERR_OUT_OF_RESOURCES	Not enough system resources are available to perform the operation.
3	QERR_OUT_OF_RANGE	A value is outside the valid range.
4	QERR_INVALID_ARGUMENT	One of the arguments is invalid.
5	QERR_PAGE_FAULT	A page fault occurred accessing one of the arguments.
6	QERR_NOT_SUPPORTED	The specified option or operation is not supported. It may be supported on other platforms. Please check the documentation.
7	QERR_DEADLOCK	A deadlock situation would have occurred.
8	QERR_BUSY	An operation is already in progress.
9	QERR_OBJECT_NOT_FOUND	The object could not be found.
10	QERR_FILE_NOT_FOUND	The file could not be found.
11	QERR_NO_PERMISSION	The process lacks the appropriate privileges to perform the operation. If you are downloading a model then the model may be loaded on the target. Stop the model and download the code again. If you are uploading a MAT file then the host and target are likely the same machine and the operation would overwrite the MAT file with itself.
12	QERR_TOO_MANY_PROCESSES	Too many processes are accessing an RTDLL.
13	QERR_UNRECOGNIZED_ERROR	An operating system function returned an unrecognized error.
14	QERR_TIMED_OUT	The operation timed out.
15	QERR_LIBRARY_NOT_FOUND	Unable to locate the dynamic link library or shared object.
16	QERR_LIBRARY_NOT_CLOSED	Failed to close dynamic link library or shared object.
17	QERR_STRING_TOO_SMALL	The string buffer is too small to hold the result.
18	QERR_STRING_NOT_TERMINATED	The string is not null-terminated within the given size.
19	QERR_INVALID_URI	The absolute URI is not valid.
20	QERR_URI_OPTION_TOO_LONG	The option name for a URI is too long. Option names must not be longer than URI_MAX_OPTION_LENGTH.
21	QERR_MISSING_URI_OPTION_VALUE	The option for a URI is present but there is no associated value, as expected.
22	QERR_INVALID_URI_OPTION_VALUE	The option for a URI is present but the value is invalid.
23	QERR_INVALID_URI_PORT_VALUE	The port for a URI is present but the value is invalid.
24	QERR_MISSING_FUNCTION	A required function is missing from a driver.
25	QERR_INVALID_CONNECTION	The connection is not valid. A connection cannot be used after it has been closed.
26	QERR_NON_BLOCKING_NOT_SUPPORTED	Non-blocking mode is not supported for the given protocol.
27	QERR_CANNOT_INITIALIZE_SOCKETS	It was not possible to initialize the socket library.
28	QERR_NAGLE_NOT_SUPPORTED	The Nagle algorithm is not supported for the given communication subsystem.
29	QERR_INVALID_BUFFER_SIZE	The specified buffer size is not valid. It may be out of an acceptable range.
30	QERR_SOCKET_NOT_REUSABLE	The socket address could not be made reusable.
31	QERR_CANNOT_BIND_SOCKET	It was not possible to bind the socket to the given port. Check that the port number is valid and not in use.
32	QERR_CANNOT_LISTEN	It was not possible to listen on the specified connection.
33	QERR_CANNOT_CONNECT	It was not possible to connect to the specified URI.
34	QERR_WOULD_BLOCK	A non-blocking operation would have blocked.
35	QERR_INTERRUPTED	A blocking operation was interrupted by a signal.
36	QERR_HOST_NOT_FOUND	The specified host could not be found.
37	QERR_INVALID_SOCKET	Socket is not valid. It may have been closed already or never created successfully.
38	QERR_CANNOT_LINGER	Unable to set the linker options for a connection.
39	QERR_CANNOT_ACCEPT_CONNECTION	The listening socket was unable to accept a client connection.
40	QERR_CANNOT_SEND	Unable to send data over a connection.
41	QERR_CANNOT_RECEIVE	Unable to receive data over a connection.
42	QERR_CANNOT_POLL	Unable to poll a connection.
43	QERR_CANNOT_SHUTDOWN	Unable to shut down send and/or receives on the connection.
44	QERR_CONNECTION_SHUTDOWN	The connection has been shut down.
45	QERR_CANNOT_CLOSE	Unable to close the connection.
46	QERR_CANNOT_GET_TIME	Unable to get the current high-resolution time.
47	QERR_CANNOT_SUBTRACT_TIMEOUTS	The timeouts cannot be subtracted because the left-hand side is relative and the right hand side is absolute.
48	QERR_CANNOT_ADD_TIMEOUTS	The timeouts cannot be added because both sides are absolute timeouts.
49	QERR_CANNOT_OBTAIN_LOCK	Cannot obtain a lock to gain exclusive access to a critical section of code.
50	QERR_INVALID_RECONFIGURATION	Reconfiguration instance is not valid. It may have been closed already or never opened successfully.
51	QERR_BEGIN_CONTROL_NOT_CALLED	The reconfiguration_begin_control function has not been called.
52	QERR_CANNOT_SWITCH	An attempt to switch models failed due to a communication failure.
53	QERR_INVALID_BASE	The given base is invalid and cannot be used to convert the integer to a string.
54	QERR_INVALID_TIMER_EVENT	The timer event passed as an argument is invalid.
55	QERR_INVALID_TIMER_NOTIFICATION	The timer notification structure is invalid.
56	QERR_INVALID_TIMER_RESOLUTION	The specified timer resolution is invalid.
57	QERR_INVALID_TIMER_PERIOD	The specified timer period is invalid.
58	QERR_INVALID_TIMER	The timer passed as an argument is invalid.
59	QERR_CANNOT_GET_RESOLUTION	The timer resolution could not be retrieved. Stack or memory corruption is likely.
60	QERR_CANNOT_SET_RESOLUTION	The timer resolution could not be set. The user does not have permission.
61	QERR_BEGIN_RESOLUTION_NOT_CALLED	The qtimer_begin_resolution function has not been called successfully.
62	QERR_STATE_INCOMPATIBLE	The state information is not compatible. Reconfiguration states must have the same data type and size.
63	QERR_INVALID_STATE	The state is invalid. It may have already been unregistered.
64	QERR_INVALID_STREAM	The stream is not valid. A stream cannot be used after it has been closed.
65	QERR_STREAM_BUFFER_TOO_SMALL	The stream buffer is too small to send or receive units of the given size.
66	QERR_INVALID_DPC	The DPC object is not valid. A DPC object cannot be used after it has been closed.
67	QERR_INVALID_METHOD	The method code received is not valid. The DPC object should be closed.
68	QERR_INVALID_INTERFACE	The interface code received is not valid. The DPC object should be closed.
69	QERR_DPC_DISCONNECTED	The DPC connection has been closed at the peer.
70	QERR_INVALID_LOG	The log object is not valid. A log object cannot be used after it has been closed.
71	QERR_INVALID_SEMAPHORE	The semaphore is not valid. A semaphore cannot be used after it has been destroyed.
72	QERR_INVALID_MUTEX	The mutex is not valid. A mutex cannot be used after it has been destroyed.
73	QERR_ARGUMENT_LIST_TOO_BIG	The argument list for the model is too big.
74	QERR_FILE_NOT_EXECUTABLE	The model specified is not executable.
75	QERR_TOO_MANY_LINKS	Too many symbolic links or prefixes.
76	QERR_NAME_TOO_LONG	The length of a path or pathname component exceeds the limit.
77	QERR_NOT_DIRECTORY	A component of the path isn't a directory.
78	QERR_NAME_CONFLICT	A different kind of object with the same name appears in the global namespace.
79	QERR_INVALID_ESCAPE_SEQUENCE	An escape sequence in a quoted string is invalid.
80	QERR_INVALID_STOP_BITS	Stop bits option has an invalid value. It must be "1", "1.5" or "2".
81	QERR_INVALID_FLOW_CONTROL	Invalid flow control option. Supported values are "none", "hw", "sw".
82	QERR_INVALID_PARITY	Invalid parity option. Supported values are "none", "even", "odd", "mark", "space".
83	QERR_NOT_SOCK_STREAM	The operation is not supported because the socket is not a SOCK_STREAM socket.
84	QERR_CANNOT_FIND_SOCKET_DRIVER	The operation failed because the socket manager/driver could not be found.
85	QERR_NETWORK_FAILED	The network subsystem has failed.
86	QERR_SOCKETS_NOT_INITIALIZED	The socket library has not been initialized.
87	QERR_OPERATION_IN_PROGRESS	A blocking socket operation is currently in progress.
88	QERR_INVALID_CARD_HANDLE	The given t_card handle is not a valid card. In some Simulink versions, this error can arise when a HIL Initialize block is not in the same subsystem as a HIL Timebase block, due to Simulink incorrectly determining the execution order. In this case, try putting the two HIL blocks in the same subsystem.
89	QERR_VERSION_ARGUMENT_IS_NULL	The version object passed as a parameter is NULL.
90	QERR_INVALID_VERSION_ARGUMENT	The version structure does not have the right length.
91	QERR_DRIVER_MISSING_OPEN_OR_CLOSE	A hardware driver is missing the open and/or close function.
92	QERR_CARD_ARGUMENT_IS_NULL	The card argument to hil_open is NULL.
93	QERR_CARD_TYPE_ARGUMENT_IS_NULL	The card type argument to hil_open is NULL.
94	QERR_FUNCTION_NOT_SUPPORTED	The function is not supported.
95	QERR_MISSING_ANALOG_INPUTS	No analog input channels were specified even though the number of analog inputs is nonzero.
96	QERR_MISSING_ANALOG_OUTPUTS	No analog output channels were specified even though the number of analog outputs is nonzero.
97	QERR_MISSING_ENCODER_INPUTS	No encoder input channels were specified even though the number of encoder inputs is nonzero.
98	QERR_MISSING_PWM_OUTPUTS	No PWM output channels were specified even though the number of PWM outputs is nonzero.
99	QERR_MISSING_DIGITAL_INPUTS	No digital input channels were specified even though the number of digital inputs is nonzero.
100	QERR_MISSING_DIGITAL_OUTPUTS	No digital outputs were specified even though the number of digital outputs is nonzero.
101	QERR_MISSING_OTHER_INPUTS	No other input channels were specified even though the number of other inputs is nonzero.
102	QERR_MISSING_OTHER_OUTPUTS	No other output channels were specified even though the number of other outputs is nonzero.
103	QERR_MISSING_CLOCK_INPUTS	No clocks were specified even though the number of clocks is nonzero.
104	QERR_TASK_ARGUMENT_IS_NULL	The task argument to a HIL function is NULL.
105	QERR_INVALID_TASK_HANDLE	An invalid task handle was passed as an argument to a HIL function.
106	QERR_BOARD_ARGUMENT_IS_NULL	The board argument passed to the board-specific HIL driver is NULL. This situation should never occur unless the user is calling the board-specific driver directly or memory has been corrupted.
107	QERR_UNABLE_TO_OPEN_DRIVER	An operating system specific kernel-level driver for the card was found but could not be loaded. There may be a device conflict, hardware problem, or the driver may not be correctly installed.
108	QERR_BOARD_NOT_FOUND	An operating system specific kernel-level driver for the specified card could not be found. The card or driver may not be installed. The kernel-level driver is the driver that gets installed when the operating system detects the hardware. Check Device Manager to see if the card is present or recognized by the operating system. Also verify that you have selected the correct card in the HIL Initialize block or hil_open function.
109	QERR_BOARD_IN_USE	The board is in use by another process and the board-specific driver does not support multi-process access to the card.
110	QERR_UNABLE_TO_LOCK_DEVICE	It was not possible to get exclusive access to the device. The operation has been aborted.
111	QERR_BUFFER_OVERFLOW	For a read operation, the buffer has overflowed. For a write operation, there is no more data left in the buffer. The sampling frequency is too fast for the rate at which data is being read from or written to the buffer. For HIL Timebase blocks or HIL tasks, oversampling has occurred. For Stream blocks, the hardware FIFO overflowed.
112	QERR_UNABLE_TO_CLOSE_DRIVER	It was not possible to close the operating system specific kernel-level driver. The driver handle may be invalid. For example, the device may have already been closed or memory may have been corrupted.
113	QERR_INVALID_BOARD_HANDLE	An invalid board handle was passed as an argument to the board-specific HIL driver. Once a card has been closed using hil_close the board handle is invalid.
114	QERR_OUT_OF_REQUIRED_SYSTEM_RESOURCES	There are not enough system resources to perform the requested operation. Try rebooting, requesting fewer samples, or adding more memory to your machine.
115	QERR_DRIVER_INCOMPATIBLE_WITH_BOARD_DLL	The board-specific HIL driver passed an invalid parameter to the operating system specific kernel-level driver for the board. The board-specific HIL driver is likely not compatible with the operating system specific kernel-level driver for the board. Make sure both are up-to-date and compatible versions.
116	QERR_INTERNAL_BUFFER_TOO_SMALL	The board-specific HIL driver used an internal buffer that was too small for the operating system specific kernel-level driver for the board. The board-specific HIL driver is likely not compatible with the operating system specific kernel-level driver for the board. Make sure both are up-to-date and compatible versions.
117	QERR_ANALOG_RESOURCE_IN_USE	The analog-to-digital converter on the HIL board is currently in use by another operation.
118	QERR_INVALID_BUFFER_HANDLE	An invalid buffer handle was passed to a board-specific HIL driver function.
119	QERR_ANALOG_INPUT_CHANNELS_NOT_SUPPORTED	Analog input channels are not supported by this board.
120	QERR_TOO_MANY_ANALOG_INPUT_CHANNELS	Too many analog input channels were specified.
121	QERR_INVALID_ANALOG_INPUT_CHANNEL	One of the analog input channels that was specified is not a valid channel number. Channel numbers typically range from 0 to one less than the number of channels.
122	QERR_ENCODER_INPUT_CHANNELS_NOT_SUPPORTED	Counter input channels are not supported by this board.
123	QERR_TOO_MANY_ENCODER_INPUT_CHANNELS	Too many encoder input channels were specified.
124	QERR_INVALID_ENCODER_INPUT_CHANNEL	One of the encoder input channels that was specified is not a valid channel number. Channel numbers typically range from 0 to one less than the number of channels.
125	QERR_DIGITAL_INPUT_CHANNELS_NOT_SUPPORTED	Digital input channels are not supported by this board.
126	QERR_TOO_MANY_DIGITAL_INPUT_CHANNELS	Too many digital input channels were specified.
127	QERR_INVALID_DIGITAL_INPUT_CHANNEL	One of the digital input channels that was specified is not a valid channel number. Channel numbers typically range from 0 to one less than the number of channels.
128	QERR_OTHER_INPUT_CHANNELS_NOT_SUPPORTED	Other input channels are not supported by this board.
129	QERR_TOO_MANY_OTHER_INPUT_CHANNELS	Too many other input channels were specified.
130	QERR_INVALID_OTHER_INPUT_CHANNEL	One of the other input channels that was specified is not a valid channel number. Channel numbers are typically divided into ranges according to functionality. Refer to the documentation for your card.
131	QERR_ANALOG_OUTPUT_CHANNELS_NOT_SUPPORTED	Analog output channels are not supported by this board.
132	QERR_TOO_MANY_ANALOG_OUTPUT_CHANNELS	Too many analog output channels were specified.
133	QERR_INVALID_ANALOG_OUTPUT_CHANNEL	One of the analog output channels that was specified is not a valid channel number. Channel numbers typically range from 0 to one less than the number of channels.
134	QERR_PWM_OUTPUT_CHANNELS_NOT_SUPPORTED	PWM output channels are not supported by this board.
135	QERR_TOO_MANY_PWM_OUTPUT_CHANNELS	Too many PWM output channels were specified.
136	QERR_INVALID_PWM_OUTPUT_CHANNEL	One of the PWM output channels that was specified is not a valid channel number. Channel numbers typically range from 0 to one less than the number of channels.
137	QERR_DIGITAL_OUTPUT_CHANNELS_NOT_SUPPORTED	Digital output channels are not supported by this board.
138	QERR_TOO_MANY_DIGITAL_OUTPUT_CHANNELS	Too many digital output channels were specified.
139	QERR_INVALID_DIGITAL_OUTPUT_CHANNEL	One of the digital output channels that was specified is not a valid channel number. Channel numbers typically range from 0 to one less than the number of channels.
140	QERR_OTHER_OUTPUT_CHANNELS_NOT_SUPPORTED	Other output channels are not supported by this board.
141	QERR_TOO_MANY_OTHER_OUTPUT_CHANNELS	Too many other output channels were specified.
142	QERR_INVALID_OTHER_OUTPUT_CHANNEL	One of the other output channels that was specified is not a valid channel number. Channel numbers are typically divided into ranges according to functionality. Refer to the documentation for your card.
143	QERR_CONFLICTING_DIGITAL_DIRECTIONS	A digital channel was specified as both an input and an output. Digital channels cannot be programmed as an input and an output at the same time.
144	QERR_CLOCK_NOT_SUPPORTED	The specified clock is not supported by the board-specific HIL driver for this board.
145	QERR_HARDWARE_CLOCK_IN_USE	The specified hardware clock is already in use for another operation and the board-specific HIL driver for this board does not permit sharing of the hardware clock.
146	QERR_TOO_MANY_CLOCKS	Too many clocks were specified.
147	QERR_CLOCK_MODE_NOT_SUPPORTED	The specified clock mode is not supported by this board.
148	QERR_PWM_MODE_NOT_SUPPORTED	The specified PWM mode is not supported by this board.
149	QERR_CLOCK_FREQUENCY_NOT_POSITIVE	The clock frequency specified is negative or zero. The clock frequency must be positive.
150	QERR_CLOCK_FREQUENCY_TOO_HIGH	The clock frequency is too high for the specified clock. Try using a different clock. Hardware clocks are generally faster than the system clocks.
151	QERR_CLOCK_FREQUENCY_TOO_LOW	The clock frequency is too low for the specified clock. Try using a different clock. System clocks are preferable for low frequencies so that hardware clocks remain available for higher frequency operations.
152	QERR_CLOCK_FREQUENCY_INVALID	The clock frequency is invalid for the specified clock, or the clock may be unavailable. Try using a different clock frequency (usually slower) or a different clock.
153	QERR_DUTY_CYCLE_NOT_POSITIVE	The specified duty cycle is negative and negative duty cycles are not supported by this board.
154	QERR_DUTY_CYCLE_TOO_HIGH	The specified duty cycle is more than 100% (i.e. greater than 1.0).
155	QERR_WRONG_CLOCK_MODE	The specified clock is multipurpose and is in the wrong mode for this operation.
156	QERR_INVALID_OPERATION_HANDLE	An invalid operation handle was passed as an argument to the board-specific HIL driver. Once a task has been deleted using hil_task_delete the operation handle is invalid.
157	QERR_OPERATION_ARGUMENT_IS_NULL	The operation argument to a board-specific HIL driver is NULL. This situation should never occur unless the user is calling the board-specific driver directly or memory has been corrupted.
158	QERR_INTERRUPT_VECTOR_IN_USE	The interrupt vector required by the board is in use by another device and the board-specific HIL driver does not support sharing of the interrupt vector.
159	QERR_TOO_MANY_SAMPLES_FOR_BUFFER	The number of samples requested in the read or write operation is more than the number of samples being buffered by the task. Increase the buffer size for the task or read or write fewer samples.
160	QERR_MISSING_ANALOG_INPUT_BUFFER	Analog input channels have been specified but not enough buffer space has been provided for the read operation.
161	QERR_MISSING_ENCODER_INPUT_BUFFER	Encoder input channels have been specified but not enough buffer space has been provided for the read operation.
162	QERR_MISSING_DIGITAL_INPUT_BUFFER	Digital input channels have been specified but not enough buffer space has been provided for the read operation.
163	QERR_MISSING_OTHER_INPUT_BUFFER	Other input channels have been specified but not enough buffer space has been provided for the read operation.
164	QERR_MISSING_ANALOG_OUTPUT_BUFFER	Analog output channels have been specified but not enough values have been provided for the write operation.
165	QERR_MISSING_PWM_OUTPUT_BUFFER	PWM output channels have been specified but not enough values have been provided for the write operation.
166	QERR_MISSING_DIGITAL_OUTPUT_BUFFER	Digital output channels have been specified but not enough values have has been provided for the write operation.
167	QERR_MISSING_OTHER_OUTPUT_BUFFER	Other output channels have been specified but not enough values have been provided for the write operation.
168	QERR_READING_FROM_WRITE_ONLY_TASK	An attempt was made to read from a write-only task.
169	QERR_WRITING_TO_READ_ONLY_TASK	An attempt was made to write to a read-only task.
170	QERR_PROCESS_NOT_FOUND	The specified model process could not be found.
171	QERR_PROCESS_CANNOT_BE_STOPPED	The specified model process could not be stopped.
172	QERR_ERROR_MESSAGE_NOT_FOUND	An error message corresponding to the given error code could not be found.
173	QERR_PORT_IN_USE	Unable to listen on the specified port. The port is already in use.
174	QERR_HOST_BUSY	The host is too busy to accept a connection at this point in time. Try again later.
175	QERR_HOST_SHUTDOWN	The host was shut down during the operation.
176	QERR_CONNECTION_RESET	The connection was reset. The remote peer may have exited without closing the connection.
177	QERR_CHANNEL_NOT_LISTENING	The channel is not a listening channel so it cannot be used to accept connections.
178	QERR_CHANNEL_IS_LISTENING	The channel is a listening channel so it cannot be used to send and receive data.
179	QERR_UNRECOGNIZED_BOARD_TYPE	The specified board type is not recognized. Please install the board-specific HIL driver for this board type.
180	QERR_INVALID_PREFERENCES_ROOT	The root node specified for preferences was invalid.
181	QERR_PREFERENCES_NODE_NOT_FOUND	The specified preference node could not be found.
182	QERR_CANNOT_ENUMERATE_VALUES	The values of a preferences node could not be enumerated.
183	QERR_PREFERENCES_NODE_TOO_LONG	The path for the preferences node is too long.
184	QERR_URI_NOT_FOUND	The specified URI could not be found.
185	QERR_CANNOT_SET_PREFERENCES_VALUE	The preferences value could not be set. You may not have sufficient privileges.
186	QERR_CANNOT_DELETE_PREFERENCES_VALUE	The preferences value could not be deleted. It may not exist, or you may not have sufficient privileges.
187	QERR_REMOVING_LAST_URI	An attempt has been made to remove the last URI upon which the target is serving. To avoid leaving no means to connect to the target, the last URI may not be removed. The target must serve on at least one URI.
188	QERR_REMOVING_URI_IN_USE	It is not possible to remove the URI associated with the current connection to the target.
189	QERR_OPERATION_PENDING	The operation is not complete. It is still pending. This error should never be returned by any function to the user.
190	QERR_OVERSAMPLING_DETECTED	Oversampling has been detected. The sampling rate is too fast and cannot be maintained.
191	QERR_TIMEBASE_ALREADY_REGISTERED	A Timebase block has already been registered. Only one Timebase block may be present in the model.
192	QERR_TIMEBASE_NOT_REGISTERED	A Timebase block has not been registered.
193	QERR_CANNOT_GET_PREFERENCES_VALUE	The preferences value could not be retrieved. You may not have sufficient privileges.
194	QERR_INVALID_LICENSE	The Quanser product does not have a valid license for the requested operation. For example, you may be trying to run more than one model at a time when you are only licensed for one, or your license may have expired. Run qc_get_loaded_models to see the models currently loaded and qc_stop_model to stop a model. To configure licensing use the Configure License utility found under Start Menu/All Programs/Quanser for your product. Contact Quanser if you think your license may have expired or it does not suit your current needs.
195	QERR_MISSING_LICENSE_FILE	The license file is missing. To configure licensing use the Configure License utility found under Start Menu/All Programs/Quanser for your product.
196	QERR_ETHERCAT_MASTER_NOT_FOUND	The corresponding EtherCAT Master could not be found. Make sure that an EtherCAT Master block is present in the model.
197	QERR_CANNOT_OPEN_ETHERCAT	Unable to open the EtherCAT device specified. Make sure the XML configuration and IP address specified are correct
198	QERR_ETHERCAT_DEVICE_IS_NULL	A null pointer was specified instead of a valid EtherCAT device.
199	QERR_ETHERCAT_SYNC_CLIENT_IS_NULL	The EtherCAT device does not have a synchronization client.
200	QERR_INVALID_XML_COMMENT	An invalid comment was specified in the XML file.
201	QERR_INVALID_XML	Malformed XML in the XML file.
202	QERR_INVALID_XML_DOCUMENT_TYPE	Missing document type declaration <!DOCTYPE ...> in the XML file.
203	QERR_SPACE_PRECEDES_XML_DECLARATION	Whitespace may not precede the <?xml ...> declaration in the XML file.
204	QERR_MULTIPLE_XML_ROOTS	The XML file has more than one root element.
205	QERR_UNTERMINATED_XML_COMMENT	A comment in the XML file was not terminated.
206	QERR_MISSING_XML_VERSION	The version information in the <?xml ...> XML declaration is missing.
207	QERR_INVALID_XML_VERSION	The specified XML version is not supported by this XML parser.
208	QERR_INVALID_XML_ENCODING	The encoding information in the <?xml ...> XML declaration is not specified properly.
209	QERR_INVALID_XML_STANDALONE	The standalone option in the <?xml ...> XML declaration is not specified properly.
210	QERR_INVALID_XML_DECLARATION	The <?xml ...?> XML declaration is not formed correctly.
211	QERR_INVALID_XML_DECLARATION_END	The <?xml ...?> XML declaration is not terminated correctly.
212	QERR_UNSUPPORTED_XML_MARKUP	Markup that is currently unsupported was found in the XML file.
213	QERR_MISSING_URI_PATH	The path component of the URI is missing.
214	QERR_INVALID_FILE_MODE	The mode option specified for a file URI is invalid.
215	QERR_INVALID_FILE_SHARE_MODE	The share mode option specified for a file URI is invalid.
216	QERR_NO_FILE_SIZE	The end of the file could not be determined.
217	QERR_CHANGE_NOTIFICATIONS_NOT_SUPPORTED	Change notifications are not supported on the specified file system.
218	QERR_WRITING_TO_READ_ONLY_STREAM	An attempt was made to write to a read-only stream.
219	QERR_READING_FROM_WRITE_ONLY_STREAM	An attempt was made to read from a write-only stream.
220	QERR_INVALID_STREAM_FORMAT	The character format specified for the stream is out of range.
221	QERR_ILLEGAL_UTF8_CHARACTER	An illegal UTF-8 character was encountered in the stream.
222	QERR_ILLEGAL_UTF16_CHARACTER	An illegal UTF-16 character was encountered in the stream.
223	QERR_ILLEGAL_UTF32_CHARACTER	An illegal UTF-32 character was encountered in the stream.
224	QERR_XML_DECLARATION_NOT_FIRST	An <?xml ...> declaration appears but it is not the first tag in the XML stream.
225	QERR_XML_DOCTYPE_ALREADY_PARSED	The <!DOCTYPE ...> declaration has already appeared in the XML stream.
226	QERR_INVALID_PI_TARGET_NAME	The name of the XML processing instruction target is invalid.
227	QERR_INVALID_XML_PROCESSING_INSTRUCTION	The XML processing instruction was invalid.
228	QERR_INVALID_XML_EXTERNAL_ID	The external identifier in the document type declaration is invalid.
229	QERR_INVALID_DOCTYPE_NAME	The name of the document type is invalid.
230	QERR_INVALID_XML_SYSTEM_LITERAL	The system literal associated with the external identifier in the document type declaration is invalid.
231	QERR_INVALID_DOCTYPE_NOT_TERMINATED	The document type definition is not terminated properly.
232	QERR_INVALID_XML_ELEMENT_NAME	The name of the XML element is invalid. Names must begin with a letter, underscore or colon.
233	QERR_INVALID_XML_ELEMENT	An XML element is invalid. An attribute name may be invalid or it is not terminated correctly.
234	QERR_MISSING_XML_ATTRIBUTE_VALUE	An attribute appears in an XML element tag but there is no associated value.
235	QERR_TAG_IN_XML_ATTRIBUTE_VALUES	Tags are not allowed within attribute values. Use < to put a '<' in an attribute value.
236	QERR_INVALID_XML_ENTITY_REFERENCE	Invalid XML entity reference. Escape ampersands using & to put ampersands in values.
237	QERR_INVALID_XML_CHAR_REFERENCE	The value of the character reference is not a valid character for XML.
238	QERR_UNTERMINATED_XML_ATTRIBUTE_VALUE	An XML attribute value string is not terminated.
239	QERR_CDATA_TERMINATOR_IN_CHAR_DATA	The CDATA termination sequence ']]>' is not allowed within XML content.
240	QERR_INVALID_XML_TAG	An XML tag is invalid.
241	QERR_INVALID_XML_CDATA_TAG	The XML <![CDATA[ ...]]> tag was invalid.
242	QERR_INVALID_XML_CDATA	The contents of a CDATA section were invalid. An invalid character was detected.
243	QERR_UNTERMINATED_XML_ELEMENT	An XML element was not terminated properly.
244	QERR_INVALID_DOM_NODE	The DOM node is NULL or otherwise invalid.
245	QERR_INVALID_DOM_NODE_LIST	The DOM node list is null or otherwise invalid.
246	QERR_ITEM_NOT_IN_LIST	An attempt was made to access a node in a list to which it did not belong, or the node does not belong to a list.
247	QERR_STRING_IS_NULL	The string buffer passed as an argument is NULL.
248	QERR_MISMATCHED_XML_ELEMENT_TAG	An XML end tag does not match the corresponding start tag.
249	QERR_INVALID_DOM_NAMED_NODE_MAP	The DOM named node map is null or otherwise invalid.
250	QERR_ITEM_NOT_IN_MAP	An attempt was made to access a node in a map to which it did not belong, or the node does not belong to a map.
251	QERR_DUPLICATE_XML_ATTRIBUTE	An XML element has more than one attribute with the same name.
252	QERR_ILLEGAL_UTF8_LEAD_CHAR	The UTF-8 code unit is not a valid lead byte. It is a code unit that is only valid in the middle of a UTF-8 character.
253	QERR_TRUNCATED_UTF8_CHAR	The UTF-8 character may be valid but the given length is too small to contain it.
254	QERR_ILLEGAL_UTF16_LEAD_CHAR	The UTF-16 code unit is not a valid lead byte. It is a code unit that is only valid as a surrogate code unit.
255	QERR_TRUNCATED_UTF16_CHAR	The UTF-16 character may be valid but the given length is too small to contain it.
256	QERR_CANNOT_START_LICENSE_MANAGER	The Quanser license manager could not be started.
257	QERR_CANNOT_STOP_LICENSE_MANAGER	The Quanser license manager could not be stopped.
258	QERR_TRUNCATED_UTF32_CHAR	The UTF-32 character may be valid but the given length is too small to contain it.
259	QERR_INVALID_THREAD_AFFINITY	The thread was assigned an affinity that does not correspond to an existing CPU or a CPU in the process affinity.
260	QERR_INVALID_PROCESS_AFFINITY	The process was assigned an affinity that does not correspond to an existing CPU.
261	QERR_CANNOT_GET_PROCESS_AFFINITY	The process affinity could not be determined.
262	QERR_THREAD_AFFINITY_UNAVAILABLE	Setting the thread CPU affinity is not currently available on this platform.
263	QERR_INCOMPLETE_WRITE	This error should never be returned. It is used internally by the Quanser Stream API.
264	QERR_PRINT_NUM_WRITTEN_IS_NULL	The "number written" argument to a stream_print function is NULL. It must point to an appropriately-sized integer.
265	QERR_STREAM_FORMAT_NOT_DEDUCED	The character format of the stream can only be deduced from the first bytes in the stream.
266	QERR_MISMATCHED_STREAM_FORMAT	The character format set for the stream does not match the format indicated by the byte order mark (BOM) in the stream itself.
267	QERR_DIRECTX_NOT_INSTALLED	Unable to use DirectX. Make sure DirectX 10.0 or above is installed.
268	QERR_NO_GAME_CONTROLLERS_ATTACHED	There are no game controllers currently attached to the system.
269	QERR_CANNOT_ACCESS_GAME_CONTROLLER	Unable to access game controller.
270	QERR_CANNOT_SET_GAME_CONTROLLER_FORMAT	Unable to set data format of game controller.
271	QERR_CANNOT_POLL_GAME_CONTROLLER	Unable to poll the game controller.
272	QERR_CANNOT_GET_GAME_CONTROLLER_STATE	Unable to get the state of the game controller.
273	QERR_CANNOT_GET_MOUSE_STATE	Unable to get the state of the mouse.
274	QERR_ETHERCAT_INVALID_BYTE_SIZE	Invalid ByteSize field specified for EtherCAT process image.
275	QERR_INVALID_ETHERCAT_SOURCE	Invalid Source Mac address field for the EtherCAT device.
276	QERR_INVALID_ETHERCAT_INITIALIZATION_DATA	Invalid Data field in an initialization command for an EtherCAT device.
277	QERR_INVALID_ETHERCAT_DATA_LENGTH	Invalid DataLength field in an initialization or cyclic command for an EtherCAT device.
278	QERR_CANNOT_GET_BUFFER_SIZE	It was not possible to get the buffer size.
279	QERR_CANNOT_GET_PACKET_SIZE	It was not possible to get the maximum packet size.
280	QERR_DATAGRAM_TOO_LARGE	The datagram received was too large for the buffer provided in the receive operation.
281	QERR_NO_DESIGNATED_PEER	An attempt was made to send data when no connection has been established with a particular peer. For connectionless protocols like UDP the server-side must receive data from a peer before sending any data in order to establish a "connection".
282	QERR_CANNOT_INDICATE_CLOSURE	It was not possible to indicate closure of the connection to the remote peer.
283	QERR_INVALID_PEER_OPTION	Invalid "peer" option was specified. Valid values for the "peer" option are "one", "any", "broadcast" or "manual".
284	QERR_CANNOT_BROADCAST	The communication protocol, such as UDP, could not be configured for broadcasting.
285	QERR_ETHERCAT_VALIDATE_DATA_WRONG_LENGTH	The Validate/Data field in an initialization command for an EtherCAT device contains data of a different size than the Data or DataLength field.
286	QERR_INVALID_ETHERCAT_VALIDATION_DATA	Invalid Validate/Data field in an initialization command for an EtherCAT device.
287	QERR_ETHERCAT_VALIDATE_MASK_WRONG_LENGTH	The Validate/DataMask field in an initialization command for an EtherCAT device contains data of a different size than the Data or DataLength field.
288	QERR_INVALID_ETHERCAT_VALIDATION_MASK	Invalid Validate/DataMask field in an initialization command for an EtherCAT device.
289	QERR_INVALID_ETHERCAT_TIMEOUT	Invalid Validate/Timeout field in an initialization command for an EtherCAT device.
290	QERR_INVALID_ETHERCAT_BEFORE_SLAVE	Invalid BeforeSlave field in an initialization command for an EtherCAT device.
291	QERR_INVALID_ETHERCAT_TRANSITION	Invalid Transition field in an initialization command for an EtherCAT device.
292	QERR_INVALID_ETHERCAT_REQUIRES_FIELD	Invalid Requires field in an initialization command for an EtherCAT device.
293	QERR_INVALID_ETHERCAT_COMMAND	Invalid Cmd field in an initialization or cyclic command for an EtherCAT device.
294	QERR_INVALID_ETHERCAT_LOGICAL_ADDRESS	Invalid Addr field (logical address) in an initialization or cyclic command for EtherCAT device.
295	QERR_INVALID_ETHERCAT_ADDRESS_PAGE	Invalid Adp field (physical address page) in an initialization or cyclic command for an EtherCAT device.
296	QERR_INVALID_ETHERCAT_ADDRESS_OFFSET	Invalid Ado field (physical address offset) in an initialization or cyclic command for an EtherCAT device.
297	QERR_INVALID_ETHERCAT_COUNT	Invalid Cnt field (working counter value) in an initialization command for an EtherCAT device.
298	QERR_INVALID_ETHERCAT_RETRIES	Invalid Retries field in an initialization command for an EtherCAT device.
299	QERR_INVALID_ETHERCAT_START_ADDRESS	Invalid StartAddr field in the mailbox states description for an EtherCAT master.
300	QERR_INVALID_ETHERCAT_MAILBOX_SIZE	Invalid Count field in the mailbox states description for EtherCAT master.
301	QERR_INVALID_ETHERCAT_SLAVE_ADDRESS	Invalid PhysAddr field (physical address) in the information section (Info) for an EtherCAT slave.
302	QERR_INVALID_ETHERCAT_STATE	Invalid State field (slave state) in the cyclic commands for an EtherCAT device.
303	QERR_INVALID_ETHERCAT_INPUT_OFFSET	Invalid InputOffs field (offset at which a cyclic command reads from the process image) in the cyclic commands for an EtherCAT device.
304	QERR_INVALID_ETHERCAT_OUTPUT_OFFSET	Invalid OutputOffs field (offset at which a cyclic command writes to the process image) in the cyclic commands for an EtherCAT device.
305	QERR_OUT_OF_BAND_DATA_NOT_SUPPORTED	The socket does not support receiving out-of-band data in the normal stream.
306	QERR_NO_CORRESPONDING_INTERNET_ADDRESS	There is no corresponding Internet address for the given MAC address.
307	QERR_CANNOT_SET_DESCRIPTOR_FLAGS	Unable to set the flags of a file descriptor or socket.
308	QERR_NO_ACCESS_TO_SHARED_MEMORY	The process does not have permission to create global shared memory. On Vista and later operating systems, creation of global shared memory requires SeCreateGlobalPrivilege. This privilege is only enabled by default for administrators, services and the local system account. Try adding the local=yes option to the URI e.g. "shmem://mymem:1?local=yes".
309	QERR_SEMAPHORE_NOT_FOUND	The named semaphore could not be found.
310	QERR_SEMAPHORE_ALREADY_EXISTS	The named semaphore already exists.
311	QERR_NO_CORRESPONDING_NETWORK_CARD	There is no corresponding network card for the given MAC address.
312	QERR_PATH_IN_URI	The given protocol does not support paths in the URI. Separate options from the hostname and port using a '?' rather than a '/', much like an HTTP query.
313	QERR_UNSUPPORTED_BAUD_RATE	The given serial baud rate is not supported.
314	QERR_ETHERCAT_MASTER_ALREADY_RUNNING	An EtherCAT master is already running on the given MAC address. Stop the existing EtherCAT master first.
315	QERR_MISSING_CLOCK_MODES	Clocks have been specified but not enough clock modes have been provided.
316	QERR_MISSING_ENCODER_COUNTS	Encoder input channels have been specified but not enough encoder counts have been provided.
317	QERR_MISSING_PWM_MODES	PWM output channels have been specified but not enough PWM modes have been provided.
318	QERR_MISSING_PWM_FREQUENCIES	PWM output channels have been specified but not enough PWM frequencies have been provided.
319	QERR_MISSING_PWM_DUTY_CYCLES	PWM output channels have been specified but not enough PWM duty cycles have been provided.
320	QERR_INVALID_NUMBER_OF_SAMPLES_IN_BUFFER	The number of samples in the task buffer must be greater than zero.
321	QERR_INVALID_NUMBER_OF_SAMPLES	The number of samples requested in the read or write operation must be greater than zero.
322	QERR_ETHERCAT_DATAGRAM_TOO_LARGE	The EtherCAT datagram to be sent is too large. Check the XML description.
323	QERR_NO_MORE_ETHERCAT_PACKETS	The EtherCAT master puts a limit on the number of packets which may be queued for transmission. This limit has been exceeded so no more packets are available.
324	QERR_INVALID_ETHERCAT_CYCLIC_COMMAND	The EtherCAT process image either could not be created or is not large enough for one of the cyclic command specified in the XML.
325	QERR_AUTOPILOT_ARGUMENT_IS_NULL	The autopilot argument to val_open is NULL.
326	QERR_AUTOPILOT_TYPE_ARGUMENT_IS_NULL	The autopilot type argument to val_open is NULL.
327	QERR_INVALID_AUTOPILOT_HANDLE	The given t_autopilot handle is not a valid autopilot.
328	QERR_URI_HOSTNAME_TOO_LONG	The hostname specified in the URI is too long.
329	QERR_URI_SCHEME_TOO_LONG	The scheme specified in the URI is too long.
330	QERR_INVALID_CHANNEL	The given t_channel handle is not valid.
331	QERR_ARCNET_NODE_ID_OUT_OF_BOUNDS	The given ARCNET node ID is out of bounds (0-255).
332	QERR_ARCNET_CANNOT_OPEN	Cannot open and initialize the ARCNET board.
333	QERR_ARCNET_TARGET_NODE_DNE	The ARCNET message cannot be sent because there is no node on the network with the given target node ID.
334	QERR_ARCNET_EXCESSIVE_NAKS	The ARCNET transmission failed due to excessive NAKs.
335	QERR_ETHERCAT_PACKET_LOST	An EtherCAT packet that was sent was lost and never returned. The slave device was not ready.
336	QERR_ETHERCAT_TELEGRAM_LOST	An EtherCAT telegram that was sent within a packet was not present in the packet when the packet returned. Data corruption has occurred!
337	QERR_INVALID_ETHERCAT_FRAME_LENGTH	The telegrams within an EtherCAT packet do not fit within the EtherCAT frame. Packet is corrupted!
338	QERR_ETHERCAT_COMMAND_TIMED_OUT	An EtherCAT slave did not respond as expected within the timeout interval.
339	QERR_INVALID_ETHERCAT_TELEGRAM_LENGTH	An EtherCAT telegram received from a slave was a different size than the telegram originally sent. Telegram is corrupted!
340	QERR_INVALID_ETHERCAT_MASTER_STATE	EtherCAT master cannot be set to the state requested. The state is not valid for the master.
341	QERR_INVALID_THREAD	The given thread handle is not valid.
342	QERR_CANNOT_INITIALIZE_PA10	The PA10 cannot be properly initialized due to an error.
343	QERR_CANNOT_CLOSE_PA10	An error occurred while attempting to stop and close the PA10.
344	QERR_PGR_CANNOT_INITIALIZE_CAMERA	An error occurred while attempting to initialize the PGR camera.
345	QERR_PGR_CANNOT_GRAB_IMAGE	An error occurred while attempting to grab an image using the PGR camera.
346	QERR_PGR_GRAB_IMAGE_TIMEOUT	A timeout occurred while attempting to grab an image using the PGR camera.
347	QERR_PGR_CANNOT_CLOSE	An error occurred while attempting to close the PGR camera.
348	QERR_PGR_INVALID_CUSTOM_IMAGE_SIZE	Starting the camera failed because the custom image size is invalid.
349	QERR_PGR_INVALID_IMAGE_DIMS	The dimensions of the image are not valid. The image must have 3 dimensions.
350	QERR_IMAGE_CANNOT_CONVERT	An error occurred attempting to convert the source image.
351	QERR_MISSING_ETHERCAT_COMMAND	Missing Cmd node within an InitCmd in EtherCAT XML configuration file. The Cmd node identifies the EtherCAT command and is a required field.
352	QERR_MISSING_ETHERCAT_LOGICAL_ADDRESS	Missing Addr node within an InitCmd in EtherCAT XML configuration file. The Addr node identifies the logical address and is a required field when a LRD, LWR or LRW command is used.
353	QERR_MISSING_ETHERCAT_ADDRESS_PAGE	Missing Adp node within an InitCmd in EtherCAT XML configuration file. The Adp node identifies the address page and is a required field when a command other than LRD, LWR or LRW is used.
354	QERR_MISSING_ETHERCAT_ADDRESS_OFFSET	Missing Ado node within an InitCmd in EtherCAT XML configuration file. The Ado node identifies the address offset and is a required field when a command other than LRD, LWR or LRW is used.
355	QERR_MISSING_ETHERCAT_COMMENT	Missing Comment node within an InitCmd in EtherCAT XML configuration file. The Comments node provides information about the command and is a required field.
356	QERR_MISSING_ETHERCAT_DATA	Missing Data or DataLength node within an InitCmd in EtherCAT XML configuration file. Either the Data node or the DataLength node is required because they provide the data for the command.
357	QERR_MISSING_ETHERCAT_VALIDATE_DATA	Missing Data node within the Validate section of an InitCmd in EtherCAT XML configuration file. The Data node provides the data used to validate the response from the slaves and is a required field in the Validate section.
358	QERR_MISSING_ETHERCAT_TRANSITION	Missing Transition node within an InitCmd in EtherCAT XML configuration file. The Transition nodes indicate the state transitions forward to the command should be executed and is a required field.
359	QERR_MISSING_ETHERCAT_RETRIES	Missing Retries node within an InitCmd in EtherCAT XML configuration file. The Retries node indicates how many times the EtherCAT stack attempts to resend the command and is a required field.
360	QERR_MISSING_ETHERCAT_SLAVE_INFO	Missing Info node within a Slave in EtherCAT XML configuration file. The Info node includes information about the slave and is a required field.
361	QERR_MISSING_ETHERCAT_SLAVE_COMMANDS	Missing InitCmds section within a Slave in EtherCAT XML configuration file. The InitCmds section includes all the EtherCAT initialization commands for the slave and is required.
362	QERR_MISSING_ETHERCAT_SLAVE_COMMAND	Missing InitCmd node within a Slave in EtherCAT XML configuration file. The InitCmd node identifies an EtherCAT initialization command for a slave and is required.
363	QERR_MISSING_ETHERCAT_SLAVE_NAME	Missing Name node within a Slave in EtherCAT XML configuration file. The Name node identifies the name of the slave and is required.
364	QERR_MISSING_ETHERCAT_CYCLIC_STATE	Missing State node within a cyclic Cmd node in EtherCAT XML configuration file. The State nodes identify the states in which the cyclic command should be sent and one is required.
365	QERR_MISSING_ETHERCAT_MASTER_INFO	Missing Info node within the Master section of an EtherCAT XML configuration file. The Info node includes information about the master and is a required field.
366	QERR_MISSING_ETHERCAT_MASTER_SOURCE	Missing Source node within the Master section of an EtherCAT XML configuration file. The Source node identifies the Mac address to be used by the master and is a required field.
367	QERR_MISSING_ETHERCAT_MASTER_COMMANDS	Missing InitCmds section within the Master section of an EtherCAT XML configuration file. The InitCmds section includes all the EtherCAT initialization commands for the master and is required.
368	QERR_MISSING_ETHERCAT_MASTER_COMMAND	Missing InitCmd node within the Master section of an EtherCAT XML configuration file. The InitCmd node identifies an EtherCAT initialization command for the master and is required.
369	QERR_MISSING_ETHERCAT_MAILBOX_START_ADDRESS	Missing StartAddr node within the MailboxStates section of an EtherCAT XML configuration file. The StartAddr node identifies the starting address of the mailbox and is required.
370	QERR_MISSING_ETHERCAT_MAILBOX_COUNT	Missing Count node within the MailboxStates section of an EtherCAT XML configuration file. The Count node identifies the length of the mailbox and is required.
371	QERR_MISSING_ETHERCAT_CONFIGURATION	Missing Config node within the EtherCAT XML configuration file. The Config node identifies the EtherCAT configuration and is required.
372	QERR_MISSING_ETHERCAT_SLAVE	Missing Slave node within the EtherCAT XML configuration file. The Slave node identifies an EtherCAT Slave and at least one is required.
373	QERR_MISSING_ETHERCAT_MASTER	Missing Master node within the EtherCAT XML configuration file. The Master node identifies the EtherCAT master and is required.
374	QERR_MISSING_ETHERCAT_PROCESS_IMAGE	Missing ProcessImage node within the EtherCAT XML configuration file. The ProcessImage node describes the EtherCAT process image configuration and is required.
375	QERR_MISSING_ETHERCAT_PROCESS_INPUTS	Missing Inputs node within the ProcessImage section of the EtherCAT XML configuration file. The Inputs node describes the EtherCAT input process image and is required.
376	QERR_MISSING_ETHERCAT_PROCESS_INPUTS_SIZE	Missing ByteSize node within the ProcessImage/Inputs section of the EtherCAT XML configuration file. The ByteSize node describes the size of the EtherCAT input process image and is required.
377	QERR_MISSING_ETHERCAT_PROCESS_OUTPUTS	Missing Outputs node within the ProcessImage section of the EtherCAT XML configuration file. The Outputs node describes the EtherCAT output process image and is required.
378	QERR_MISSING_ETHERCAT_PROCESS_OUTPUTS_SIZE	Missing ByteSize node within the ProcessImage/Outputs section of the EtherCAT XML configuration file. The ByteSize node describes the size of the EtherCAT output process image and is required.
379	QERR_NO_DYNAMIC_RECONFIGURATION_LICENSE	You do not have a valid license for the Dynamic Reconfiguration blockset. To configure licensing use the Configure License utility found under Start Menu/All Programs/Quanser for your product.
380	QERR_NO_COMMUNICATIONS_LICENSE	You do not have a valid license for the Quanser Communications blockset. To configure licensing use the Configure License utility found under Start Menu/All Programs/Quanser for your product.
381	QERR_NO_ETHERCAT_LICENSE	You do not have a valid license for the EtherCAT blockset. To configure licensing use the Configure License utility found under Start Menu/All Programs/Quanser for your product.
382	QERR_CANNOT_OPEN_LICENSE_FILE	Unable to open license file. Make sure that the file exists and you have permission to read the license file. Mapped network drives are not accessible with elevated privileges. Use the full UNC path, such as "\\server\licenses\john-doe.qlic", instead.
383	QERR_INVALID_LICENSE_FILE	The license file is invalid. Choose a different license file.
384	QERR_CANNOT_CREATE_PREFERENCES_NODE	It was not possible to create the preferences node. You may not have sufficient privileges.
385	QERR_MISSING_ANALOG_MINIMUMS	No analog minimums were specified when setting the analog ranges, even though the number of channels indicated was non-zero.
386	QERR_MISSING_ANALOG_MAXIMUMS	No analog maximums were specified when setting the analog ranges, even though the number of channels indicated was non-zero.
387	QERR_CANNOT_READ_SCHUNK_GRIPPER	An error occurred while attempting to read the state of the SCHUNK gripper.
388	QERR_SCHUNK_CANNOT_INIT	An error occurred initializing the SCHUNK gripper device.
389	QERR_SCHUNK_CANNOT_HALT	Cannot halt the SCHUNK gripper device.
390	QERR_SCHUNK_CANNOT_CLOSE	An error occurred while attempting to close the SCHUNK gripper device.
391	QERR_SCHUNK_CANNOT_MOVE_POS	An error occurred attempting to issue a move command to the SCHUNK gripper device.
392	QERR_SCHUNK_CANNOT_MOVE_VEL	An error occurred attempting to issue a velocity command to the SCHUNK gripper device.
393	QERR_SCHUNK_CANNOT_MOVE_CUR	An error occurred attempting to issue a current command to the SCHUNK gripper device.
394	QERR_SCHUNK_CANNOT_HOME	Cannot home the SCHUNK gripper device.
395	QERR_SCHUNK_INVALID_CONTROL_MODE	The specified control mode for the Schunk gripper is invalid.
396	QERR_SCHUNK_EXT_MODE_NOT_CONNECTED	The 'mode' input signal must be connected when the Control mode external parameter is set.
397	QERR_INVALID_ANALOG_INPUT_RANGE	One of the ranges specified for an analog input channel is not valid for the selected hardware.
398	QERR_INVALID_ANALOG_OUTPUT_RANGE	One of the ranges specified for an analog output channel is not valid for the selected hardware.
399	QERR_CARD_IDENTIFIER_ARGUMENT_IS_NULL	The card identifier argument to hil_open is NULL.
400	QERR_BOARD_IDENTIFIER_ARGUMENT_IS_NULL	The board identifier argument passed to the board-specific HIL driver is NULL. This situation should never occur unless the user is calling the board-specific driver directly or memory has been corrupted.
401	QERR_INVALID_BOARD_IDENTIFIER	The board identifier is not valid. The zero-based index of the board is typically used as the board identifier, although NI boards may also be identified by their name in MAX.
402	QERR_INVALID_DEVICE_HANDLE	The handle to the device is invalid.
403	QERR_CANNOT_OPEN_DRIVER_DIRECTORY	An attempt to get the driver directory failed.
404	QERR_WIIMOTE_WRITE_REPORT_FAILED	An attempt to write the wiimote report failed.
405	QERR_WIIMOTE_CANNOT_CALIBRATE	Failed to read calibration information from the wiimote. Make sure the wiimote is on and connected to the receiving device.
406	QERR_WIIMOTE_CANNOT_OPEN	Failed to open a connection to the wiimote.
407	QERR_WIIMOTE_READ_FAILED	A wiimote read request failed.
408	QERR_WIIMOTE_NOT_FOUND	Unable to find the wiimote with the specified wiimote number. Make sure the wiimote number is valid and that the wiimote is powered on and connected.
409	QERR_INVALID_WIIMOTE_DEVICE_HANDLE	Unable to open a handle to the wiimote device. The wiimote is possibly already opened by another process.
410	QERR_DAQMX_CANNOT_CLEAR_TASK	DAQmx was unable to clear or release a National Instruments task. Try restarting MATLAB.
411	QERR_DAQMX_CANNOT_CREATE_TASK	DAQmx was unable to create a new task. The resource may already be in use by another block.
412	QERR_DAQMX_CANNOT_ATTACH_ADC_TO_TASK	DAQmx was unable to attach the specified analog input to the analog input task.
413	QERR_DAQMX_CANNOT_START_TASK	DAQmx was unable to start the National Instruments device task. Make sure the device is not already open. If no devices are open, try restarting MATLAB.
414	QERR_DAQMX_ERROR_SAMPLING_ADC	DAQmx failed to execute the National Instruments analog input task.
415	QERR_DAQMX_ERROR_RESETTING_DEVICE	DAQmx failed to reset the device.
416	QERR_DAQMX_CANNOT_ATTACH_DAC_TO_TASK	DAQmx was unable to attach the specified analog output to the National Instruments analog output task.
417	QERR_DAQMX_ERROR_WRITING_DAC	DAQmx failed to output the requested analog value.
418	QERR_ANALOG_OUTPUT_RANGE_DIFF	All analog output channels must have the same output range for this board.
419	QERR_ANALOG_INPUT_RANGE_DIFF	All analog input channels must have the same input range for this board.
420	QERR_DAQMX_CANNOT_SET_HARDWARE_CLOCK_RATE	Error setting the hardware timing for the time-base block.
421	QERR_DAQMX_CLOCK_ERROR_WAITING_FOR_SAMPLE	Either the configuration is invalid, or a sample edge was missed before executing the wait.
422	QERR_DAQMX_CANNOT_ATTACH_ENCODER_TO_TASK	DAQmx was unable to attach the specified channel to the National Instruments encoder input task.
423	QERR_DAQMX_ERROR_SAMPLING_ENCODER	DAQmx failed to execute the National Instruments encoder input task.
424	QERR_DAQMX_ERROR_CHANGING_ENC_DIR_SRC	DAQmx failed to change the source for the encoder count direction.
425	QERR_DAQMX_CANNOT_ATTACH_DIGITAL_TO_TASK	DAQmx was unable to attach the specified digital lines to the National Instruments task.
426	QERR_DAQMX_ERROR_SAMPLING_DIGITAL	DAQmx failed to execute the digital read task.
427	QERR_DAQMX_ERROR_WRITING_DIGITAL	DAQmx failed to output the requested digital values.
428	QERR_JR3PCI_CANNOT_INIT	Cannot initialize the JR3 PCI force torque sensor.
429	QERR_BUFFER_IS_NULL	The buffer argument is NULL. It should be a valid pointer.
430	QERR_DIGITAL_OUTPUT_LOCKED	The requested digital output is locked. If you need access to this line, use the generic version of this driver.
431	QERR_ANALOG_OUTPUT_LOCKED	The requested analog output is locked. If you need access to this channel, use the generic version of this driver.
432	QERR_PWM_OUTPUT_LOCKED	The requested PWM output is locked. If you need access to this channel, use the generic version of this driver.
433	QERR_MISSING_URI_OPTION_NAME	No option name was found even though a value was specified.
434	QERR_ENCODER_QUADRATURE_MODE_NOT_SUPPORTED	The selected quadrature decoding is not available for this board.
435	QERR_MISSING_ENCODER_QUADRATURE_MODES	Encoder input channels have been specified but not enough encoder quadrature modes have been provided.
436	QERR_INVALID_ENCODER_QUADRATURE_MODE	One of the encoder quadrature modes specified was not a valid mode. Valid modes are 0, 1, 2 or 4.
437	QERR_MISSING_ENCODER_FILTER_FREQUENCIES	Encoder input channels have been specified but not enough encoder filter frequencies have been provided.
438	QERR_INVALID_ENCODER_FILTER_FREQUENCY	One of the encoder filter frequencies specified was not a valid frequency. The frequency is out of range or negative.
439	QERR_HIL_READ_NOT_SUPPORTED	The hil_read function in C or MATLAB and HIL Read block in QUARC are not supported by this particular card.
440	QERR_HIL_READ_ANALOG_NOT_SUPPORTED	The hil_read_analog function in C or MATLAB and HIL Read Analog block in QUARC are not supported by this particular card.
441	QERR_HIL_READ_ANALOG_BUFFER_NOT_SUPPORTED	The hil_read_analog_buffer function and HIL Read Analog Buffer block are not supported by this particular card.
442	QERR_HIL_READ_ANALOG_CODES_NOT_SUPPORTED	The hil_read_analog_codes function and HIL Read Analog Codes block are not supported by this particular card.
443	QERR_HIL_READ_ANALOG_WRITE_ANALOG_NOT_SUPPORTED	The hil_read_analog_write_analog function and HIL Read Analog Write Analog block are not supported by this particular card.
444	QERR_HIL_READ_ANALOG_WRITE_ANALOG_BUFFER_NOT_SUPPORTED	The hil_read_analog_write_analog_buffer function and HIL Read Analog Write Analog Buffer block are not supported by this particular card.
445	QERR_HIL_READ_BUFFER_NOT_SUPPORTED	The hil_read_buffer function and HIL Read Buffer block are not supported by this particular card.
446	QERR_HIL_READ_DIGITAL_NOT_SUPPORTED	The hil_read_digital function in C or MATLAB and HIL Read Digital block in QUARC are not supported by this particular card.
447	QERR_HIL_READ_DIGITAL_BUFFER_NOT_SUPPORTED	The hil_read_digital_buffer function and HIL Read Digital Buffer block are not supported by this particular card.
448	QERR_HIL_READ_DIGITAL_WRITE_DIGITAL_NOT_SUPPORTED	The hil_read_digital_write_digital function and HIL Read Digital Write Digital block are not supported by this particular card.
449	QERR_HIL_READ_DIGITAL_WRITE_DIGITAL_BUFFER_NOT_SUPPORTED	The hil_read_digital_write_digital_buffer function and HIL Read Digital Write Digital Buffer block are not supported by this particular card.
450	QERR_HIL_READ_ENCODER_NOT_SUPPORTED	The hil_read_encoder function in C or MATLAB and HIL Read Encoder block in QUARC are not supported by this particular card.
451	QERR_HIL_READ_ENCODER_BUFFER_NOT_SUPPORTED	The hil_read_encoder_buffer function and HIL Read Encoder Buffer block are not supported by this particular card.
452	QERR_HIL_READ_ENCODER_WRITE_PWM_NOT_SUPPORTED	The hil_read_encoder_write_pwm function and HIL Read Encoder Write PWM block are not supported by this particular card.
453	QERR_HIL_READ_ENCODER_WRITE_PWM_BUFFER_NOT_SUPPORTED	The hil_read_encoder_write_pwm_buffer function and HIL Read Encoder Write PWM Buffer block are not supported by this particular card.
454	QERR_HIL_READ_OTHER_NOT_SUPPORTED	The hil_read_other function in C or MATLAB and HIL Read Other block in QUARC are not supported by this particular card.
455	QERR_HIL_READ_OTHER_BUFFER_NOT_SUPPORTED	The hil_read_other_buffer function and HIL Read Other Buffer block are not supported by this particular card.
456	QERR_HIL_READ_OTHER_WRITE_OTHER_NOT_SUPPORTED	The hil_read_other_write_other function and HIL Read Write Other block are not supported by this particular card.
457	QERR_HIL_READ_OTHER_WRITE_OTHER_BUFFER_NOT_SUPPORTED	The hil_read_other_write_other_buffer function and HIL Read Other Write Other Buffer block are not supported by this particular card.
458	QERR_HIL_READ_WRITE_NOT_SUPPORTED	The hil_read_write function and HIL Read Write block are not supported by this particular card. Try using a more specific function or block.
459	QERR_HIL_READ_WRITE_BUFFER_NOT_SUPPORTED	The hil_read_write_buffer function and HIL Read Write Buffer block are not supported by this particular card. Try using a more specific function or block.
460	QERR_HIL_SET_ANALOG_INPUT_RANGES_NOT_SUPPORTED	The hil_set_analog_input_ranges function is not supported by this particular card. It may be necessary to uncheck the two "Set analog input parameters..." options in the HIL Initialize block.
461	QERR_HIL_SET_ANALOG_OUTPUT_RANGES_NOT_SUPPORTED	The hil_set_analog_output_ranges function is not supported by this particular card. It may be necessary to uncheck the two "Set analog output parameters..." options in the HIL Initialize block.
462	QERR_HIL_SET_CARD_SPECIFIC_OPTIONS_NOT_SUPPORTED	The hil_set_card_specific_options function is not supported by this particular card. It may be necessary to uncheck the two "Set clock parameters..." options in the HIL Initialize block.
463	QERR_HIL_SET_CLOCK_MODE_NOT_SUPPORTED	The hil_set_clock_mode function is not supported by this particular card.
464	QERR_HIL_SET_DIGITAL_DIRECTIONS_NOT_SUPPORTED	The hil_set_digital_directions function is not supported by this particular card. Set the "Digital input channels" and "Digital output channels" parameters in the HIL Initialize block to empty matrices: [].
465	QERR_HIL_SET_ENCODER_COUNTS_NOT_SUPPORTED	The hil_set_encoder_counts function and HIL Set Encoder Counts block are not supported by this particular card. It may be necessary to uncheck the two "Set initial encoder counts..." options in the HIL Initialize block.
466	QERR_HIL_SET_ENCODER_FILTER_FREQUENCY_NOT_SUPPORTED	The hil_set_encoder_filter_frequency function is not supported by this particular card. It may be necessary to set the "Encoder filter frequency" parameter in the HIL Initialize block to an empty matrix: [].
467	QERR_HIL_SET_ENCODER_QUADRATURE_MODE_NOT_SUPPORTED	The hil_set_encoder_quadrature_mode function is not supported by this particular card. It may be necessary to set the "Encoder quadrature" parameter in the HIL Initialize block to an empty matrix: [].
468	QERR_HIL_SET_PWM_DUTY_CYCLE_NOT_SUPPORTED	The hil_set_pwm_duty_cycle function is not supported by this particular card. It may be necessary to uncheck the two "Set PWM output parameters..." options in the HIL Initialize block.
469	QERR_HIL_SET_PWM_FREQUENCY_NOT_SUPPORTED	The hil_set_pwm_frequency function is not supported by this particular card. It may be necessary to uncheck the two "Set PWM output parameters..." options in the HIL Initialize block.
470	QERR_HIL_SET_PWM_MODE_NOT_SUPPORTED	The hil_set_pwm_mode function is not supported by this particular card. It may be necessary to uncheck the two "Set PWM output parameters..." options in the HIL Initialize block.
471	QERR_HIL_TASK_CREATE_ANALOG_READER_NOT_SUPPORTED	The hil_task_create_analog_reader function and HIL Read Analog Timebase block are not supported by this particular card.
472	QERR_HIL_TASK_CREATE_ANALOG_READER_ANALOG_WRITER_NOT_SUPPORTED	The hil_task_create_analog_reader_analog_writer function and HIL Read Analog Write Analog Timebase block are not supported by this particular card.
473	QERR_HIL_TASK_CREATE_DIGITAL_READER_NOT_SUPPORTED	The hil_task_create_digital_reader function and HIL Read Digital Timebase block are not supported by this particular card.
474	QERR_HIL_TASK_CREATE_DIGITAL_READER_DIGITAL_WRITER_NOT_SUPPORTED	The hil_task_create_digital_reader_digital_writer function and HIL Read Digital Write Digital Timebase block are not supported by this particular card.
475	QERR_HIL_TASK_CREATE_DIGITAL_WRITER_NOT_SUPPORTED	The hil_task_create_digital_writer function that HIL Write Digital Timebase block are not supported by this particular card.
476	QERR_HIL_TASK_CREATE_ENCODER_READER_NOT_SUPPORTED	The hil_task_create_encoder_reader function and HIL Read Encoder Timebase block are not supported by this particular card.
477	QERR_HIL_TASK_CREATE_ENCODER_READER_PWM_WRITER_NOT_SUPPORTED	The hil_task_create_encoder_reader_pwm_writer function and HIL Read Encoder Write PWM Timebase block are not supported by this particular card.
478	QERR_HIL_TASK_CREATE_OTHER_READER_NOT_SUPPORTED	The hil_task_create_other_reader function and HIL Read Other Timebase block are not supported by this particular card.
479	QERR_HIL_TASK_CREATE_OTHER_READER_OTHER_WRITER_NOT_SUPPORTED	The hil_task_create_other_reader_other_writer function and HIL Read Other Write Other Timebase block are not supported by this particular card.
480	QERR_HIL_TASK_CREATE_OTHER_WRITER_NOT_SUPPORTED	The hil_task_create_other_writer function and HIL Write Other Timebase block are not supported by this particular card.
481	QERR_HIL_TASK_CREATE_PWM_WRITER_NOT_SUPPORTED	The hil_task_create_pwm_writer function and HIL Write PWM Timebase block are not supported by this particular card.
482	QERR_HIL_TASK_CREATE_READER_NOT_SUPPORTED	The hil_task_create_reader function and HIL Read Timebase block are not supported by this particular card. Try one of the more specific functions or blocks.
483	QERR_HIL_TASK_CREATE_READER_WRITER_NOT_SUPPORTED	The hil_task_create_reader_writer function and HIL Read Write Timebase block are not supported by this particular card. Try one of the more specific functions or blocks.
484	QERR_HIL_TASK_CREATE_WRITER_NOT_SUPPORTED	The hil_task_create_writer function and HIL Write Timebase block are not supported by this particular card. Try one of the more specific functions or blocks.
485	QERR_HIL_TASK_DELETE_NOT_SUPPORTED	The hil_task_delete function is not supported by this particular card. If one of the hil_task_create... functions is supported then the hil_task_delete function MUST be supported! In this case, contact the driver manufacturer.
486	QERR_HIL_TASK_FLUSH_NOT_SUPPORTED	The hil_task_flush function is not supported by this particular card. If one of the hil_task_write... functions is supported then the hil_task_flush function MUST be supported! In this case, contact the driver manufacturer.
487	QERR_HIL_TASK_READ_NOT_SUPPORTED	The hil_task_read function is not supported by this particular card. Try one of the more specific functions.
488	QERR_HIL_TASK_READ_ANALOG_NOT_SUPPORTED	The hil_task_read_analog function is not supported by this particular card.
489	QERR_HIL_TASK_READ_ANALOG_WRITE_ANALOG_NOT_SUPPORTED	The hil_task_read_analog_write_analog function is not supported by this particular card.
490	QERR_HIL_TASK_READ_DIGITAL_NOT_SUPPORTED	The hil_task_read_digital function is not supported by this particular card.
491	QERR_HIL_TASK_READ_DIGITAL_WRITE_DIGITAL_NOT_SUPPORTED	The hil_task_read_digital_write_digital function is not supported by this particular card.
492	QERR_HIL_TASK_READ_ENCODER_NOT_SUPPORTED	The hil_task_read_encoder function is not supported by this particular card.
493	QERR_HIL_TASK_READ_ENCODER_WRITE_PWM_NOT_SUPPORTED	The hil_task_read_encoder_write_pwm function is not supported by this particular card.
494	QERR_HIL_TASK_READ_OTHER_NOT_SUPPORTED	The hil_task_read_other function is not supported by this particular card.
495	QERR_HIL_TASK_READ_OTHER_WRITE_OTHER_NOT_SUPPORTED	The hil_task_read_other_write_other function is not supported by this particular card.
496	QERR_HIL_TASK_READ_WRITE_NOT_SUPPORTED	The hil_task_read_write function is not supported by this particular card. Try one of the more specific functions.
497	QERR_HIL_TASK_START_NOT_SUPPORTED	The hil_task_start function is not supported by this particular card. If one of the hil_task_create... functions is supported then the hil_task_start function MUST be supported! In this case, contact the driver manufacturer.
498	QERR_HIL_TASK_STOP_NOT_SUPPORTED	The hil_task_stop function is not supported by this particular card. If one of the hil_task_create... functions is supported then the hil_task_stop function MUST be supported! In this case, contact the driver manufacturer.
499	QERR_HIL_TASK_WRITE_NOT_SUPPORTED	The hil_task_write function is not supported by this particular card. Try one of the more specific functions.
500	QERR_HIL_TASK_WRITE_ANALOG_NOT_SUPPORTED	The hil_task_write_analog function is not supported by this particular card.
501	QERR_HIL_TASK_WRITE_DIGITAL_NOT_SUPPORTED	The hil_task_write_digital function is not supported by this particular card.
502	QERR_HIL_TASK_WRITE_OTHER_NOT_SUPPORTED	The hil_task_write_other function is not supported by this particular card.
503	QERR_HIL_TASK_WRITE_PWM_NOT_SUPPORTED	The hil_task_write_pwm function is not supported by this particular card.
504	QERR_HIL_WRITE_NOT_SUPPORTED	The hil_write function in C or MATLAB and HIL Write block in QUARC are not supported by this particular card.
505	QERR_HIL_WRITE_ANALOG_NOT_SUPPORTED	The hil_write_analog function in C or MATLAB and HIL Write Analog block in QUARC are not supported by this particular card. You might need to change a board specific option to enable it.
506	QERR_HIL_WRITE_ANALOG_BUFFER_NOT_SUPPORTED	The hil_write_analog_buffer function and HIL Write Analog Buffer block are not supported by this particular card.
507	QERR_HIL_WRITE_ANALOG_CODES_NOT_SUPPORTED	The hil_write_analog_codes function and HIL Write Analog Codes block are not supported by this particular card.
508	QERR_HIL_WRITE_BUFFER_NOT_SUPPORTED	The hil_write_buffer function and HIL Write Buffer block are not supported by this particular card. Try using one of the more specific functions or blocks.
509	QERR_HIL_WRITE_DIGITAL_NOT_SUPPORTED	The hil_write_digital function in C or MATLAB and HIL Write Digital block in QUARC are not supported by this particular card.
510	QERR_HIL_WRITE_DIGITAL_BUFFER_NOT_SUPPORTED	The hil_write_digital_buffer function and HIL Write Digital Buffer block are not supported by this particular card.
511	QERR_HIL_WRITE_OTHER_NOT_SUPPORTED	The hil_write_other function in C or MATLAB and HIL Write Other block in QUARC are not supported by this particular card.
512	QERR_HIL_WRITE_OTHER_BUFFER_NOT_SUPPORTED	The hil_write_other_buffer function and HIL Write Other Buffer block are not supported by this particular card.
513	QERR_HIL_WRITE_PWM_NOT_SUPPORTED	The hil_write_pwm function in C or MATLAB and HIL Write PWM block in QUARC are not supported by this particular card. You might need to change a board specific option to enable it.
514	QERR_HIL_WRITE_PWM_BUFFER_NOT_SUPPORTED	The hil_write_pwm_buffer function and HIL Write PWM Buffer block are not supported by this particular card.
515	QERR_Q3_CONTROLPAQ_FW_CANNOT_OPEN_BOARD	The specified Q3 ControlPaQ-FW board could not be opened. Check that the board is powered and properly connected and that the board number is correct.
516	QERR_CANNOT_CREATE_GAME_CONTROLLER_WINDOW	Unable to create a window for the force feedback game controller.
517	QERR_CANNOT_SET_GAME_CONTROLLER_COOPERATIVE_LEVEL	Unable to set the cooperation level of the force feedback game controller.
518	QERR_CONNECTION_NOT_BOUND	The connection has not been bound. This error typically occurs with UDP client sockets whenever a receive operation is attempted prior to the first send operation. UDP client sockets are implicitly bound to the UDP port by the first send operation. Hence, a send must always be done first after a UDP client connection is established.
519	QERR_NO_SIMULINK_DEVELOPMENT_LICENSE	You do not have a valid license for the QUARC Simulink Development Environment. To configure licensing use the Configure License utility found under Start Menu/All Programs/Quanser for your product.
520	QERR_INVALID_CIRCULAR_BUFFER	The circular buffer is invalid. A circular buffer may not be used after it has been closed.
521	QERR_READ_TOO_LONG	The amount of data requested in a read operation is too long. For example, you cannot read more bytes from a circular buffer than are contained in the buffer.
522	QERR_WRITE_TOO_LONG	The amount of data provided in a write operation is too long. For example, you cannot write more bytes to a circular buffer than can be contained in the buffer.
523	QERR_TOO_MANY_FORCE_FEEDBACK_EFFECTS	It is not possible to add another force feedback effect because the maximum number of force feedback effects has already been reached. Change the maximum number of force feedback effects in the Host Force Feedback Game Controller block.
524	QERR_INVALID_FORCE_FEEDBACK_AXIS	An invalid axis number was specified for a force feedback effect. Axes numbers must range from 0 to 5, corresponding to x, y, z, Rx, Ry and Rz axes respectively.
525	QERR_CANNOT_CREATE_FORCE_FEEDBACK_EFFECT	Unable to create a force feedback effect. The device may be out of memory for effects or the effect is not supported.
526	QERR_CANNOT_START_FORCE_FEEDBACK_EFFECT	Unable to download or start a force feedback effect. The device may be out of memory.
527	QERR_CANNOT_STOP_FORCE_FEEDBACK_EFFECT	Unable to stop a force feedback effect.
528	QERR_CANNOT_SET_FORCE_FEEDBACK_EFFECT_PARAMETERS	Unable to set the parameters of a force feedback effect. The parameters may be incorrect or unsupported by the device.
529	QERR_INVALID_FORCE_FEEDBACK_EFFECT	The given force feedback effect is invalid and does not belong to the game controller specified. The effect may not be supported by the game controller. Also, once an effect has been removed it cannot be used.
530	QERR_INVALID_GAME_CONTROLLER	The specified game controller is invalid.
531	QERR_GAME_CONTROLLER_NOT_FOUND	The specified game controller could not be found. A Host Force Feedback Game Controller block for the game controller is required in the same diagram to use the other Force Feedback blocks. There should only be one Host Force Feedback Game Controller block per game controller. Also ensure that the Host Force Feedback Game Controller block comes before the other Force Feedback blocks in the sorted (execution) order.
532	QERR_CANNOT_START_TARGET_MANAGER	The QUARC Target Manager could not be started.
533	QERR_CANNOT_STOP_TARGET_MANAGER	The QUARC Target Manager could not be stopped.
534	QERR_PEER_IGNORING_SHUTDOWN	The peer is not responding to the connection being shut down. The receive operation has timed out.
535	QERR_INVALID_PERIODIC_EFFECT_TYPE	An invalid periodic effect type was passed to the game_controller_add_periodic_force_effect function.
536	QERR_INVALID_CONDITION_EFFECT_TYPE	An invalid condition effect type was passed to the game_controller_add_condition_force_effect function.
537	QERR_TOO_MANY_GAME_CONTROLLER_AXES	No more than six axes may be specified for a game controller force effect.
538	QERR_INVALID_NUMBER_OF_CONDITIONS	Invalid number of conditions for a condition force effect. There may be one condition for all axes or one condition for each axis.
539	QERR_INCOMPLETE_READ	This error should never be returned. It is used internally by the Quanser Stream API.
540	QERR_EXCLUSIVE_ACCESS_ALREADY_GRANTED	Exclusive access to this card has already been granted to another process. Only one process may have exclusive access to the card at one time. Try again later.
541	QERR_EXCLUSIVE_ACCESS_NOT_GRANTED	Exclusive access to this card was not granted to the process which is attempting to release it. Exclusive access can only be released by the process with exclusive access, and only from the same open handle.
542	QERR_CARD_LOCATION_IS_NULL	The card location pointer passed as an argument is NULL. A valid pointer to a t_card_location object must be passed to the hil_get_exclusive_access and hil_release_exclusive_access functions.
543	QERR_HIL_ACQUIRE_EXCLUSIVE_ACCESS_NOT_SUPPORTED	The hil_acquire_exclusive_access function and Exclusive access to device option on the HIL Initialize block are not supported by this particular card.
544	QERR_HIL_RELEASE_EXCLUSIVE_ACCESS_NOT_SUPPORTED	The hil_release_exclusive_access function and Exclusive access to device option on the HIL Initialize block are not supported by this particular card.
545	QERR_DRIVER_MISSING_GET_OR_RELEASE_ACCESS	The hil_get_exclusive_access or hil_release_exclusive_access function is present in the driver while the other one is not. These functions are optional, but if one is included in the driver then both must be included.
546	QERR_CIRCULAR_BUFFER_NOT_FOUND	The corresponding Circular Buffer Initialize could not be found. Make sure that a Circular Buffer Initialize block is present in the model.
547	QERR_INCOMPATIBLE_PIPE	An attempt was made to create a named pipe for a pipe that already exists and the properties of the pipe are incompatible. Be aware that under the Windows target, the pipe name "localhost" is already used by the system.
548	QERR_SENSORAY_TOO_MANY_BOARDS	The Sensoray driver supports a maximum of 16 boards.
549	QERR_SENSORAY_ILLEGAL_PARAM	An illegal parameter was passed to the Sensoray driver.
550	QERR_SENSORAY_EEPROM_ERROR	The Sensoray board failed to access its EEPROM during initialization. Try unregistering the board and re-registering it. If the error persists, then the problem is likely a hardware fault.
551	QERR_SENSORAY_UNSPECIFIED_ERROR	The Sensoray board has experienced an unspecified fault.
552	QERR_KERNEL_CANNOT_REGISTER_BOARD	The kernel-mode driver can't register the board. This is usually caused by applications that fail to unlink from the system dll, or if the kernel model driver is improperly installed or registered.
553	QERR_DMA_BUFFER_LOCK	A DMA buffer lock failed.
554	QERR_CANNOT_START_INTERRUPT_THREAD	Failed to launch an interrupt thread
555	QERR_DAC_COMM_TIMEOUT	Cannot communicate with analog output.
556	QERR_COUNTER_RESOURCE_CONFLICT	Counter parameter is illegal in current operation mode. The counter may already be in use by another operation such as providing a timebase.
557	QERR_STREAM_NOT_CONNECTED	The non-blocking stream is in the process of connecting but is not yet connected. The stream_poll function or Stream Poll block must be invoked with the connect flag to complete the connection.
558	QERR_LIBRARY_LOAD_ERROR	The dynamic link library was found, but an error occurred while loading it.
559	QERR_PHANTOM_OMNI_CANNOT_OPEN_BOARD	The specified PHANTOM Omni board could not be opened. Check that the device is powered and properly connected and that the board number is correct.
560	QERR_JR3PCI_CANNOT_SET_FULL_SCALES	An error occurred attempting to set the full scales for the JR3 sensor.
561	QERR_ALTIA_ARGUMENT_IS_NULL	The altia argument to altia_open is NULL.
562	QERR_INVALID_ALTIA	An invalid Altia handle was passed as an argument. Once an Altia connection has been closed using altia_close the Altia handle is invalid.
563	QERR_ALTIA_INPUT_IS_NULL	The altia_input argument to altia_register_input is NULL.
564	QERR_ALTIA_OUTPUT_IS_NULL	The altia_output argument to altia_register_output is NULL.
565	QERR_INVALID_ALTIA_EVENT_NAME	An invalid event name was passed to an altia function.
566	QERR_INVALID_ALTIA_INPUT	An invalid t_altia_input handle was passed as an argument.
567	QERR_INVALID_ALTIA_OUTPUT	An invalid t_altia_output handle was passed as an argument.
568	QERR_BEEP_ARGUMENT_IS_NULL	The beep argument to beep_open is NULL.
569	QERR_INVALID_BEEP	An invalid beep handle was passed as an argument. Once an beep handle has been closed using beep_close the beep handle is invalid.
570	QERR_BEEP_FAILED	A beep was attempted but it failed for some reason. It is possible that permission was denied.
571	QERR_BEEP_FREQUENCY_OUT_OF_RANGE	The specified beep frequency is out of the acceptable range. See the documentation for valid beep frequencies.
572	QERR_SCAN_VALUE_IS_NULL	An argument passed to a stream_scan function to store a value scanned is NULL. Arguments must contain the address of appropriately typed quantities.
573	QERR_CARD_SPECIFIC_OPTION_NOT_RECOGNIZED	The card specific option specified is not recognized.
574	QERR_CARD_SPECIFIC_OPTION_VALUE_NOT_RECOGNIZED	The value of a card specific option specified is not recognized.
575	QERR_CARD_SPECIFIC_OPTION_NOT_SUPPORTED	The card specific option specified is recognized, but is not supported by this board.
576	QERR_INVALID_ROOMBA	The Roomba object is not valid. A Roomba object cannot be used after it has been closed.
577	QERR_INVALID_ROOMBA_SENSOR_ID	The Roomba sensor id is not valid. It must be a value between 7 and 42 inclusive.
578	QERR_VISION_CAMERA_NOT_FOUND	The camera could not be found or is not valid for image capture.
579	QERR_INVALID_IPLIMAGE	Invalid IplImage structure.
580	QERR_SAVE_IMAGE	Failed to save IplImage using.
581	QERR_INIT_V4L2_DEVICE	Failed to initialize v4l2 video input.
582	QERR_GRAB_V4L2_IMAGE	Failed to grab image from v4l2 video input.
583	QERR_NO_RPC_SERVER_FOR_BEEP	The RPC server is unavailable so the beep cannot be sounded. This problem has been seen on laptops running Vista.
584	QERR_MISMATCHED_CHARACTER	A character in the input stream did not match the character sequence described in the format string when scanning the stream.
585	QERR_EMPTY_SCAN	The stream was closed before the first character was read. This error is used internally and should never be returned to the user.
586	QERR_URI_MISSING_HOST	The hostname is missing from the URI. Although a hostname is not required for all URIs, the fact that you are getting this message indicates that it is required in this circumstance.
587	QERR_PATH_IN_PIPE_URI	The form of the pipe URI must be pipe:name or pipe://server/name. The name cannot contain forward or backward slashes.
588	QERR_HOST_IN_PIPE_URI	The pipe URI contains a hostname. Specifying a hostname is not supported on this target, because pipes may not be used to communicate between computers on the selected target.
589	QERR_HIQ_UNKNOWN_REPORT_TYPE	The specified HiQ report type is unknown. Ensure that the selected HiQ report or mode is valid.
590	QERR_HIQ_RECEIVE_BLOCKED	The HiQ thread failed to receive any data from the HiQ board.
591	QERR_HIL_WATCHDOG_SET_ANALOG_EXPIRATION_STATE_NOT_SUPPORTED	The hil_watchdog_set_analog_expiration_state function is not supported by this particular card.
592	QERR_HIL_WATCHDOG_SET_DIGITAL_EXPIRATION_STATE_NOT_SUPPORTED	The hil_watchdog_set_digital_expiration_state function is not supported by this particular card.
593	QERR_HIL_WATCHDOG_SET_PWM_EXPIRATION_STATE_NOT_SUPPORTED	The hil_watchdog_set_pwm_expiration_state function is not supported by this particular card.
594	QERR_HIL_WATCHDOG_SET_OTHER_EXPIRATION_STATE_NOT_SUPPORTED	The hil_watchdog_set_other_expiration_state function is not supported by this particular card.
595	QERR_HIL_WATCHDOG_START	The hil_watchdog_start function is not supported by this particular card.
596	QERR_HIL_WATCHDOG_STOP	The hil_watchdog_stop function is not supported by this particular card.
597	QERR_HIL_WATCHDOG_RELOAD	The hil_watchdog_reload function is not supported by this particular card.
598	QERR_HIL_WATCHDOG_IS_EXPIRED	The hil_watchdog_is_expired function is not supported by this particular card.
599	QERR_HIL_WATCHDOG_CLEAR	The hil_watchdog_clear function is not supported by this particular card.
600	QERR_HIL_INVALID_DIGITAL_STATE	One of the digital states specified was not a valid state. Valid modes are 0 (low), 1 (high), 2 (tristate) or 3 (no change).
601	QERR_ANALOG_EXPIRATION_STATE_NOT_ZERO	This board only supports resetting the analog outputs to zero when the watchdog expires.
602	QERR_DIGITAL_EXPIRATION_STATE_NOT_TRISTATE	This board only supports resetting the digital outputs to tri-state when the watchdog expires.
603	QERR_CLOCK_NOT_WATCHDOG	The specified clock is not a watchdog timer on this board.
604	QERR_ANALOG_EXPIRATIONS_NOT_CONFIGURED	Some of the analog output expiration states have not been configured. This board requires that if any of the expiration states have been configured then all the states must be configured, and the "Set analog outputs when a watchdog timer expires" must be enabled.
605	QERR_DIGITAL_EXPIRATIONS_NOT_CONFIGURED	Some of the digital output expiration states have not been configured. This board requires that if any of the expiration states have been configured then all the states must be configured, and the "Set digital outputs when a watchdog timer expires" must be enabled.
606	QERR_CLOCK_PERIOD_TOO_HIGH	The clock period is too high for the specified clock. Try using a different clock. Hardware clocks are generally faster than the system clocks.
607	QERR_CLOCK_PERIOD_TOO_LOW	The clock period is too low for the specified clock. Try using a different clock. System clocks are preferable for long periods so that hardware clocks remain available for operations requiring a shorter period.
608	QERR_HIL_TASK_CREATE_ANALOG_WRITER_NOT_SUPPORTED	The hil_task_create_analog_writer function and HIL Write Analog Timebase block are not supported by this particular card.
609	QERR_FALCON_FAILED_TO_INITIALIZE	The Novint Falcon failed to initialize. Make sure the Falcon is plugged in and powered.
610	QERR_FALCON_COULD_NOT_OPEN_DEVICE	Could not open the Novint Falcon device.
611	QERR_FALCON_COULD_NOT_START_DEVICE	Could not start the Novint Falcon control loop.
612	QERR_FALCON_COULD_NOT_CREATE_CALLBACK	Could not create a callback for the Novint Falcon.
613	QERR_FALCON_COULD_NOT_MAKE_CURRENT	Novint Falcon error.
614	QERR_Q8_SERIES_EXPIRATIONS_NOT_CONFIGURED	Some of the analog or digital output expiration states have not been configured. The Q8-series of boards requires that all analog and digital output channels be configured to be reset on watchdog expiration, not just some of the channels.
615	QERR_CONNECTION_ABORTED	An incoming connection was indicated, but was subsequently terminated by the remote peer prior to accepting the call.
616	QERR_INVALID_ROOMBA_SONG_NUMBER	Roomba song number must be 0 to 15.
617	QERR_INVALID_ROOMBA_SONG_LENGTH	Roomba song length must be 1 to 16.
618	QERR_INVALID_ROOMBA_NOTE_NUMBER	The note number of Roomba song must be 31 to 127.
619	QERR_INVALID_ROOMBA_DIGITAL_OUTPUT	Roomba digital output must be 0 to 7.
620	QERR_INVALID_ROOMBA_EVENT_NO	Roomba event no must be 1 to 22.
621	QERR_INVALID_ROOMBA_MODE	Roomba mode number must be 1 to 3.
622	QERR_INVALID_ROOMBA_DEMO	Roomba demo number must be 1 to 11.
623	QERR_INVALID_ROOMBA_LED_BITS	Roomba LED bits must be 0 to 10.
624	QERR_INVALID_ROOMBA_SCRIPT_LENGTH	Data length mismatches according to the script length defined in the first byte.
625	QERR_PREFERENCES_VALUE_CONTAINS_ENVIRONMENT_VARIABLES	The preferences value contains environment variable references, which cannot be expanded.
626	QERR_INVALID_TYPE_OF_PREFERENCES_VALUE	The preferences value is not a string.
627	QERR_INVALID_ROOMBA_STREAM_STATE	Roomba stream state must be 0 to 1.
628	QERR_INVALID_ROOMBA_DRIVER_BITS	Roomba low side driver number must be 0 to 7.
629	QERR_INVALID_ROOMBA_DUTY_CYCLE	Roomba duty cycle must be 0 to 128.
630	QERR_INVALID_ROOMBA_PACKET_NUMBER	The number of Roomba sensor packets requested must be 0 to 43
631	QERR_INVALID_ROOMBA_STREAM_HEADER	Roomba stream header must be 19.
632	QERR_CORRUPTED_ROOMBA_STREAM	Roomba stream is corrupted.
633	QERR_INVALID_ROOMBA_STREAM_SIZE	Roomba stream size must be (number of packets + number of data bytes + 3)
634	QERR_INVALID_IMAGE_DIMENSION	Invalid dimension for image data
635	QERR_INVALID_SERACCEL	The SerAccel object is not valid. A SerAccel object cannot be used after it has been closed.
636	QERR_SERACCEL_COULD_NOT_OPEN_DEVICE	The SerAccel could not be opened. Make sure the SerAccel is connected and set to binary mode.
637	QERR_SERACCEL_COULD_NOT_START_DEVICE	The SerAccel could not be started.
638	QERR_SERACCEL_COULD_NOT_READ_DEVICE	The SerAccel could not be read.
639	QERR_NO_ALTIA_LICENSE	You do not have a valid license for the Altia blockset. To configure licensing use the Configure License utility found under Start Menu/All Programs/Quanser for your product.
640	QERR_NO_IROBOT_ROOMBA_LICENSE	You do not have a valid license for the IRobot Roomba blockset. To configure licensing use the Configure License utility found under Start Menu/All Programs/Quanser for your product.
641	QERR_NO_JR3_FORCE_TORQUE_LICENSE	You do not have a valid license for the JR3 Force/Torque Sensor blockset. To configure licensing use the Configure License utility found under Start Menu/All Programs/Quanser for your product.
642	QERR_NO_MITSUBISHI_PA10_LICENSE	You do not have a valid license for the Mitsubishi PA-10 blockset. To configure licensing use the Configure License utility found under Start Menu/All Programs/Quanser for your product.
643	QERR_NO_NINTENDO_WIIMOTE_LICENSE	You do not have a valid license for the Nintendo Wiimote blockset. To configure licensing use the Configure License utility found under Start Menu/All Programs/Quanser for your product.
644	QERR_NO_NOVINT_FALCON_LICENSE	You do not have a valid license for the Novint Falcon blockset. To configure licensing use the Configure License utility found under Start Menu/All Programs/Quanser for your product.
645	QERR_NO_POINTGREY_CAMERAS_LICENSE	You do not have a valid license for the Point Grey Research Cameras blockset. To configure licensing use the Configure License utility found under Start Menu/All Programs/Quanser for your product.
646	QERR_NO_SCHUNK_GRIPPER_LICENSE	You do not have a valid license for the Schunk Gripper blockset. To configure licensing use the Configure License utility found under Start Menu/All Programs/Quanser for your product.
647	QERR_NO_SENSABLE_OMNI_LICENSE	You do not have a valid license for the SensAble Omni blockset. To configure licensing use the Configure License utility found under Start Menu/All Programs/Quanser for your product.
648	QERR_INVALID_IMAGE_NAME	The specified image does not exist.
649	QERR_NO_INTERNAL_USE_LICENSE	The "Active during normal simulation" feature is not available. Did you intend to run in real-time using the "Monitor & Tune" button? Due to safety and liability concerns, accessing physical hardare in normal simulation rather than real-time is not enabled.
650	QERR_DRAGANFLY_X6_CRC_FAILED	The Draganfly X6 autopilot message failed the CRC check.
651	QERR_CANPCI_NOT_FOUND	The specified CANPCI could not be found.
652	QERR_CANPCI_INIT_FAILED	Initialization of the CANPCI driver failed.
653	QERR_CANPCI_INVALID_PARAMETERS	Parameters supplied to a CANPCI driver function are invalid.
654	QERR_CANPCI_SEND_MESSAGE_FAILED	The CANPCI device failed to send a CAN message.
655	QERR_CANPCI_GET_MESSAGE_FAILED	The CANPCI device failed to receive a CAN message.
656	QERR_CANPCI_INVALID_CHANNEL	The CANPCI channel specified is invalid.
657	QERR_CANPCI_START_FAILED	Failed to start the CANPCI card(s).
658	QERR_INVALID_UBLOX	The Ublox object is not valid. A Ublox object cannot be used after it has been closed.
659	QERR_NO_UBLOX_MSG	No Ublox message
660	QERR_INVALID_UBLOX_MSG	Invalid Ublox message
661	QERR_INVALID_UBLOX_IDENTIFIERS	Invalid Ublox identifiers
662	QERR_INVALID_UBLOX_CHECKSUM	Invalid Ublox checksum
663	QERR_INVALID_NMEA_MSG	Invalid NMEA message
664	QERR_INVALID_NMEA_CHECKSUM	Invalid NMEA checksum
665	QERR_INVALID_UBLOX_DATA	Invalid Ublox data
666	QERR_UNSUPPORTED_GPS_DATA_FIELD	Unsupported Ublox GPS data field
667	QERR_ROBOSTIX_INVALID_PROGRAM_VERSION	The program on the robostix has an invalid version information (i.e., is either too old or too new).
668	QERR_SPI_TRANSMIT	A transmit error occured using the Serial Peripheral Interface (SPI) protocol.
669	QERR_SPI_RECEIVE	A receive error occured using the Serial Peripheral Interface (SPI) protocol.
670	QERR_NO_SUCH_DEVICE	No such device or address
671	QERR_INTIME_NOT_RUNNING	A real-time object could not be created. The INtime real-time kernel may not be running. Use the INtime Status icon in the system tray to start the INtime kernel.
672	QERR_CANNOT_CONNECT_TO_LICENSE_MANAGER	It was not possible to connect to the license manager.
673	QERR_MISSING_PROPERTIES	No properties were specified even though the number of properties is nonzero.
674	QERR_MISSING_PROPERTIES_BUFFER	Properties have been specified but no values have been provided for the operation.
675	QERR_HIL_GET_INTEGER_PROPERTY_NOT_SUPPORTED	The hil_get_integer_property function and HIL Get Property block are not supported by this particular card.
676	QERR_HIL_GET_DOUBLE_PROPERTY_NOT_SUPPORTED	The hil_get_double_property function and HIL Get Property block are not supported by this particular card.
677	QERR_HIL_GET_STRING_PROPERTY_NOT_SUPPORTED	The hil_get_string_property function and HIL Get Property block are not supported by this particular card.
678	QERR_HIL_SET_INTEGER_PROPERTY_NOT_SUPPORTED	The hil_set_integer_property function and HIL Set Property block are not supported by this particular card.
679	QERR_HIL_SET_DOUBLE_PROPERTY_NOT_SUPPORTED	The hil_set_double_property function and HIL Set Property block are not supported by this particular card.
680	QERR_HIL_SET_STRING_PROPERTY_NOT_SUPPORTED	The hil_set_string_property function and HIL Set Property block are not supported by this particular card.
681	QERR_PROPERTY_NOT_RECOGNIZED	One or more of the specified properties were not recognized by the board-specific driver.
682	QERR_GUMSTIX_WATCHDOG_CLOCK_PERIOD_TOO_HIGH	The watchdog timer period (a.k.a., timeout interval) is too high. The gumstix watchdog timer may be programmed with any integer value between 1 and 255 seconds.
683	QERR_GUMSTIX_WATCHDOG_CLOCK_PERIOD_TOO_LOW	The watchdog timer period (a.k.a., timeout interval) is too low. The gumstix watchdog timer may be programmed with any integer value between 1 and 255 seconds.
684	QERR_DIGITAL_INPUTS_NOT_INITIALIZED	The specified digital input channels are not initialized. This board requires that all the channels which will be used for digital inputs should be configured on the HIL Initialize block's "Digital Inputs" tab. Set the "Digital input channels" field to all the digital channels that will be used as digital inputs on the board.
685	QERR_DIGITAL_OUTPUTS_NOT_INITIALIZED	The specified digital output channels are not initialized. This board requires that all the channels which will be used for digital outputs should be configured on the HIL Initialize block's "Digital Outputs" tab. Set the "Digital output channels" field to all the digital channels that will be used as digital outputs on the board.
686	QERR_FILTER_PROTOCOLS_REQUIRE_URI	Missing "uri" option. Filter protocols require a "uri" option in their URI to identify the underlying communication protocol.
687	QERR_CONFLICTING_COUNTER_MODES	The specified counter is used as both an encoder and a PWM output channel.
688	QERR_DAQMX_ERROR_CHANGING_PWM_OUT_TERM	DAQmx failed to change the counter output terminal.
689	QERR_DAQMX_ERROR_WRITING_PWM	DAQmx failed to output the requested PWM values.
690	QERR_DAQMX_CANNOT_ATTACH_PWM_TO_TASK	DAQmx was unable to attach the specified counter channel to the PWM output task.
691	QERR_DAQMX_ERROR_SETTING_IMPLICIT_TIMING	DAQmx was unable to configure implicit timing for the PWM output task.
692	QERR_DAQMX_CANNOT_GET_PWM_CHANNEL_NAME	DAQmx was unable to obtain the name of the PWM channel attached to the PWM output task.
693	QERR_NI_DUTY_CYCLE_OUT_OF_RANGE	The specified PWM duty cycle is out of range. For National Instruments cards, the duty cycle should fall within the range between a minimum value of 0.1 % (0.001) and a maximum value of 99.9 % (0.999).
694	QERR_NI_FREQUENCY_OUT_OF_RANGE	The specified PWM frequency is out of range. For National Instruments cards, the frequency must satisfy the following inequality: (Maximum Counter Output Frequency/Max Number of Counts) <= frequency <= (Maximum Counter Output Frequency/4).
695	QERR_DAQMX_ERROR_CHANGING_TIMEBASE_RATE	DAQmx was unable to set the counter timebase rate.
696	QERR_INVALID_DSR_CONTROL	Invalid dsr option. Supported values are "off", "on" or "handshake".
697	QERR_OPTITRACK_RIGID_BODY_INIT_ERROR	Unable to initialize the OptiTrack Rigid Body API. Make sure the proper software is installed and the path variable is set.
698	QERR_OPTITRACK_POINT_CLOUD_INIT_ERROR	Unable to initialize the OptiTrack Point Cloud API. Make sure the proper software is installed and the path variable is set.
699	QERR_OPTITRACK_RIGID_BODY_ID_INVALID	The rigid body ID is invalid or not found in the rigid body definition file. Valid IDs are integers ranging from 1 to 1024.
700	QERR_OPTITRACK_ERROR_STARTING_CAMERAS	An error occurred starting the OptiTrack camera system. Make sure they are properly connected.
701	QERR_OPTITRACK_ERROR_STOPPING_CAMERAS	An error occurred stopping the OptiTrack camera system.
702	QERR_OPTITRACK_INVALID_CALIBRATION_FILE	Unable to load OptiTrack calibration file. Make sure the file path is correct or the calibration file is compatible with the Motive software version that you have installed.
703	QERR_OPTITRACK_INVALID_RIGID_BODY_FILE	Unable to load OptiTrack rigid body definition file. Make sure the file path is correct.
704	QERR_OPTITRACK_TOO_MANY_RIGID_BODIES	The number of specified OptiTrack rigid bodies exceeds the number of objects in the rigid body definition file.
705	QERR_VISION_INVALID_PARAMETER	Invalid parameter for OpenCV functions
706	QERR_VISION_INVALID_NO_OF_CHANNELS	Invalid number of color planes of the input image
707	QERR_NO_CANCELLATION_HANDLER	An attempt was made to pop a cancellation handler when no cancellation handler was pushed on the stack!
708	QERR_VISION_INVALID_INPUT	Invalid input for OpenCV functions
709	QERR_PORT_UNREACHABLE	The port is unreachable. For UDP datagrams, a previous send operation resulted in an ICMP Port Unreachable message, indicating that there is likely no server listening on the UDP port.
710	QERR_CANNOT_SET_PORT_UNREACHABLE	Cannot set the port unreachable option to disable reporting ICMP Port Unreachable messages for UDP datagrams
711	QERR_MUST_BE_ADMINISTRATOR	The process lacks the appropriate privileges to perform the operation. Administrator privileges are required. Log in as an Administrator or run as Administrator.
712	QERR_MISMATCHED_ENCODER_FILTER_FREQUENCY	One of the encoder filter frequencies specified does not match the filter frequency of the other channels. This card only allows one filter frequency to be set for all encoder channels.
713	QERR_MISMATCHED_CLOCK_FREQUENCY	One of the clock frequencies specified does not match the frequency of another channel which shares the same clock resources.
714	QERR_UNABLE_TO_OPEN_DIALOG	The underlying operating system could not open the dialog.
715	QERR_HIL_SET_DIGITAL_OUTPUT_CONFIGURATION_NOT_SUPPORTED	The hil_set_digital_output_configuration function is not supported by this particular card.
716	QERR_HIL_SET_PWM_CONFIGURATION_NOT_SUPPORTED	The hil_set_pwm_configuration function is not supported by this particular card.
717	QERR_HIL_SET_PWM_DEADBAND_NOT_SUPPORTED	The hil_set_pwm_deadband function is not supported by this particular card.
718	QERR_MISSING_DIGITAL_CONFIGURATIONS	Digital output channels have been specified but not enough digital output configurations have been provided.
719	QERR_MISSING_PWM_CONFIGURATIONS	PWM output channels have been specified but not enough PWM configurations have been provided.
720	QERR_MISSING_PWM_ALIGNMENTS	PWM output channels have been specified but not enough PWM alignments have been provided.
721	QERR_MISSING_PWM_POLARITIES	PWM output channels have been specified but not enough PWM polarities have been provided.
722	QERR_MISSING_PWM_DEADBANDS	PWM output channels have been specified but not enough PWM high-to-low or low-to-high deadband values have been provided.
723	QERR_INVALID_PWM_CONFIGURATION	One of the PWM output configurations specified is not a valid configuration. Configurations must be in the range from 0 to 2 inclusive (0=independent, 1=complementary, 2=bipolar)
724	QERR_INVALID_PWM_ALIGNMENT	One of the PWM output alignments specified is not a valid configuration. Configurations must be 0 (leading-edge-aligned), 1 (trailing-edge-aligned) or 2 (center-aligned)
725	QERR_INVALID_PWM_POLARITY	One of the PWM output polarities specified is not a valid configuration. Configurations must be 1 (active high) or 0 (active low)
726	QERR_PWM_CONFIGURATION_NOT_SUPPORTED	One of the PWM output channels specified does not support the given PWM output configuration. For example, channel 7 of the QPID cannot be used in the complementary configuration as the primary channel because it is the last PWM channel. Alternatively, the given configuration may not be supported by the card at all.
727	QERR_INVALID_PWM_DEADBAND	One of the PWM deadbands specified is negative. Deadband values must be non-negative.
728	QERR_BIPOLAR_PWM_ON_EVEN_CHANNELS_ONLY	The bipolar PWM configuration may only be configured on the even PWM channels for this card. See the card's documentation for details.
729	QERR_GPS_READ_FAILED	A read of the GPS device failed.
730	QERR_PWM_ALIGNMENT_NOT_SUPPORTED	One of the PWM output channels specified does not support the given PWM alignment.
731	QERR_PWM_POLARITY_NOT_SUPPORTED	One of the PWM output channels specified does not support the given PWM polarity.
732	QERR_PWM_DEADBAND_NOT_SUPPORTED	One of the PWM output channels specified does not support the given PWM deadband.
733	QERR_INVALID_CHANNEL_ORDER_FOR_BIPOLAR_PWM	The PWM output channels are not ordered correctly for the bipolar PWM output. Bipolar PWM outputs require that both the primary and secondary channel be written at the same time, and that the secondary channel be specified in the channel order immediately after the primary channel.
734	QERR_SUM_OF_PWM_DEADBANDS_EXCEEDS_PERIOD	The sum of the leading and trailing deadbands exceeds the PWM period. The deadbands cannot be so large that they exceed the PWM period.
735	QERR_PWM_MODES_NOT_ONE_SHOT	At least one PWM channel is in one-shot mode, while others are not. The current card requires that all PWM channels be configured in one-shot mode, if this mode is used, not just some of the channels.
736	QERR_PWM_EXPIRATIONS_NOT_CONFIGURED	Some of the PWM output expiration states have not been configured. This board requires that if any of the expiration states have been configured then all the states must be configured, and the "Set PWM outputs when a watchdog timer expires" must be enabled.
737	QERR_PHANTOM_CANNOT_INITIALIZE	Phantom block cannot initialize the device.
738	QERR_PHANTOM_SCHEDULER_ERROR	Phantom block cannot start the Phantom API scheduler.
739	QERR_PHANTOM_SCHEDULER_RATE_ERROR	Phantom API scheduler rate error.
740	QERR_PHANTOM_READ_FAILED	Phantom block cannot read the outputs of the device.
741	QERR_PHANTOM_WRITE_FAILED	Phantom block cannot write to inputs of the device.
742	QERR_PHANTOM_CANNOT_CLOSE	Phantom block cannot close the device.
743	QERR_NO_PHANTOM_OMNI_LICENSE	You do not have a valid license for the Phantom Omni blockset. To configure licensing use the Configure License utility found under Start Menu/All Programs/Quanser for your product.
744	QERR_NO_PHANTOM_DESKTOP_LICENSE	You do not have a valid license for the Phantom Desktop blockset. To configure licensing use the Configure License utility found under Start Menu/All Programs/Quanser for your product.
745	QERR_NO_PHANTOM_PREMIUM_LICENSE	You do not have a valid license for the Phantom Premium blockset. To configure licensing use the Configure License utility found under Start Menu/All Programs/Quanser for your product.
746	QERR_NO_PHANTOM_PREMIUM_6DOF_LICENSE	You do not have a valid license for the Phantom Premium 6DOF blockset. To configure licensing use the Configure License utility found under Start Menu/All Programs/Quanser for your product.
747	QERR_VAL_QBOT_OPEN_FAILED	Failed to open the Qbot VAL driver.
748	QERR_INVALID_KUKA_ROBOT	Invalid object. A KUKA robot object cannot be used after it has been closed.
749	QERR_KUKA_ROBOT_COULD_NOT_OPEN_DEVICE	The KUKA robot device could not be opened. Make sure a KUKA robot is connected.
750	QERR_NO_KUKA_ROBOTS_LICENSE	You do not have a valid license for the KUKA robots blockset. To configure licensing use the Configure License utility found under Start Menu/All Programs/Quanser for your product.
751	QERR_VISION_INVALID_IMAGE_SIZE	Invalid image dimension.
752	QERR_INVALID_HYMOTION_11000	Invalid object. A HyMotion-11000 object cannot be used after it has been closed.
753	QERR_HYMOTION_11000_COULD_NOT_OPEN_DEVICE	The HyMotion-11000 could not be opened. Make sure the Rexroth HyMotion-11000 Motion System is connected.
754	QERR_NO_REXROTH_HYMOTION_11000_LICENSE	You do not have a valid license for the Rexroth HyMotion-11000 blockset. To configure licensing use the Configure License utility found under Start Menu/All Programs/Quanser for your product.
755	QERR_INVALID_SHMEM_SCOPE	The shmem protocol is designed for communicating between a real-time model and a foreground application. To use it for communicating between two Windows applications, the "local=true" option is required on the shmem URI. For example, "shmem://mymem:1?local=true".
756	QERR_NO_NATURALPOINT_OPTITRACK_LICENSE	You do not have a valid license for the NaturalPoint OptiTrack blockset. To configure licensing use the Configure License utility found under Start Menu/All Programs/Quanser for your product.
757	QERR_NO_VISUALIZATION_LICENSE	You do not have a valid license for the Visualization blockset. To configure licensing use the Configure License utility found under Start Menu/All Programs/Quanser for your product.
758	QERR_NO_GPS_LICENSE	You do not have a valid license for the GPS blockset. To configure licensing use the Configure License utility found under Start Menu/All Programs/Quanser for your product.
759	QERR_INVALID_CIGI_HOST	Invalid object. A CIGI host object cannot be used after it has been closed.
760	QERR_CIGI_HOST_COULD_NOT_OPEN_DEVICE	The CIGI Host could not be opened.
761	QERR_INVALID_DEFLATE_MODE	The mode option specified for a deflate URI is invalid.
762	QERR_STATE_IS_NULL	The state argument is NULL. It should be a valid pointer.
763	QERR_WRONG_NUM_BYTES_POKED	The wrong number of bytes have been sent to a persistent stream. Verify that the number of bytes configured when the stream was created matches the number of bytes sent.
764	QERR_WRONG_NUM_BYTES_PEEKED	The wrong number of bytes have been received from a persistent stream. Verify that the number of bytes configured when the stream was created matches the number of bytes received.
765	QERR_NO_QBOT_LICENSE	You do not have a valid license for the Qbot vehicle. To configure licensing use the Configure License utility found under Start Menu/All Programs/Quanser for your product.
766	QERR_NO_UAV_LICENSE	You do not have a valid license for the UAV components. To configure licensing use the Configure License utility found under Start Menu/All Programs/Quanser for your product.
767	QERR_PHANTOM_LIBRARY_OPEN_FAILED	The SensAble PHANToM library failed to open. Make sure you have the OpenHaptics and PHANToM Device Driver software installed and the system PATH is set correctly.
768	QERR_WRONG_NUMBER_OF_INITIAL_VALUES	The wrong number of initial values were passed to visualization_open for the variables given.
769	QERR_INVALID_NEES	Invalid object. A NEES object cannot be used after it has been closed.
770	QERR_NEES_COULD_NOT_INITIALIZE	The NEES block could not be initialized.
771	QERR_NEES_COULD_NOT_COMMUNICATE	Could not communicate with the NEES daemon.
772	QERR_NEES_INVALID_DATA_FROM_DAEMON	Received invalid data from the NEES daemon.
773	QERR_NEES_COULD_NOT_CLOSE	Could not close the NEES block.
774	QERR_TCP_KEEPALIVES_NOT_SUPPORTED	TCP/IP keep alive packets on individual socket connections does not appear to be supported.
775	QERR_CANNOT_SELECT_VARIABLE	Variables cannot be selected after a visualization task has already been started.
776	QERR_INVALID_VARIABLE_NAME	The variable indicated could not be found in the scene.
777	QERR_VARIABLE_ALREADY_SELECTED	The variable has already been selected in the scene. Variables cannot be selected more than once.
778	QERR_INVALID_VARIABLE_DATATYPE	The wrong data type is being used to set the value of the given variable.
779	QERR_QERR_CANNOT_SET_VARIABLE	Variable values cannot be set until the visualization task has been started. Use the Visualization Start Task VI to start the task.
780	QERR_VARIABLE_NOT_SELECTED	The given variable has not been selected for animation. Use the Visualization Select Variable VI to select the variable for animation prior to starting the visualization task.
781	QERR_VISUALIZATION_ALREADY_STARTED	The visualization task has already been started.
782	QERR_UNABLE_TO_START_VIEWER	The Quanser 3D Viewer could not be started.
783	QERR_INVALID_VISUALIZATION_HANDLE	An invalid visualization handle was passed to a Visualization VI or function.
784	QERR_VIEWER_MAY_NOT_HAVE_EXITED	The Quanser 3D Viewer may not have exited. An unexpected error may have occurred.
785	QERR_PCAN_CANNOT_INITIALIZE	The Peak CAN device failed to initialize. Make sure the device is connected properly and the drivers and API have been installed.
786	QERR_WIIMOTION_PLUS_ACTIVATE_FAILED	The WiiMotion Plus extension failed to activate. Make sure the WiiMotion Plus extension is properly connected to the Wiimote.
787	QERR_WIIMOTION_PLUS_NOT_DETECTED	The WiiMotion Plus extension was not detected. Make sure it is properly connected to the Wiimote.
788	QERR_WIIMOTE_EXT_CONTROLLER_CHECK_FAILED	Failed to read report for Wiimote extension controllers. Make sure your Wiimote is properly connected.
789	QERR_SOFTWARE_ALREADY_INSTALLED	Another version of the software is already installed. Please uninstall the other version first.
790	QERR_NO_SPACE_ON_FILE_SYSTEM	There is no space left on the file system.
791	QERR_FILE_SYSTEM_ERROR	A physical I/O error occurred trying to access the file system.
792	QERR_INVALID_SETUP_OPERATION	An invalid operation was detected in the installation database. The installation database appears to be corrupt.
793	QERR_PREMATURE_END_OF_FILE	The end of the file was encountered prematurely. The file is corrupt.
794	QERR_PARTITION_NOT_FOUND	The specified partition could not be found. Make sure you have created the partition and have enabled the appropriate scheduler.
795	QERR_PARTITIONING_SCHEDULER_NOT_RUNNING	The partitioning scheduler is not running. Be sure to set up your system to run the partitioning scheduler before attempting to use it.
796	QERR_JOINING_PARTITION_DENIED	It was not possible to join the partition. Security constraints set up for partitioning do not allow it.
797	QERR_DIGITAL_EXPIRATION_STATE_TRISTATE_INVALID	This board does not support tristating the digital outputs when the watchdog expires. The digital outputs may only be set high or low on watchdog expiration.
798	QERR_INVALID_LICENSE_FOR_BUILDFILE	The Configure Licensing tool can only generate a build file snippet for a network client license. Specify the -c option but not the -m option (client not server/manager) when configuring the license.
799	QERR_URI_OPTION_NOT_RECOGNIZED	An option specified in the URI was not recognized as a valid option.
800	QERR_HIL_CONFLICTING_DIGITAL_OUTPUTS	Two or more digital outputs were specified with output values that conflict with one another. Refer to the device documentation for limitations.
801	QERR_DENSO_READ_TIMEOUT	The Denso Read block has timed out since no data was received. Check that the IP settings of your PC are correct and that the PC is connected to the Denso controller.
802	QERR_NO_ROOM_IN_RECEIVE_BUFFER	A communication protocol is being used that sends and receives data at the same time, such as SPI, and there is no room in the stream's receive buffer for the data that will be received during the send/flush operation.
803	QERR_NO_DATA_IN_RECEIVE_BUFFER	A communication protocol is being used that sends and receives data at the same time, such as SPI, and there is no data in the stream's receive buffer to receive. A send/flush operation should be done first. The send/flush will receive data at the same time as data is sent and fill the receive buffer so that data can be received.
804	QERR_SPI_WRONG_BYTES_TO_SEND_AND_RECEIVE	The number of bytes being sent or received is not an integer multiple of the natural word size (1 bytes for 1-8 bits, 2 bytes for 9-16 bits and 4 bytes for 17-32 bit word lengths).
805	QERR_NO_SUCH_SPI_CHANNEL	The SPI port specified in the URI is not available.
806	QERR_ONLY_SPI_MASTER_MODE_SUPPORTED	Only the SPI master mode is supported by the device being used for SPI communications. Different hardware is required for slave mode.
807	QERR_ONLY_SPI_MSB_FIRST_SUPPORTED	The SPI device specified in the URI only supports sending and receiving the most-significant bit first.
808	QERR_NO_DENSO_LICENSE	You do not have a valid license for the Denso blockset. To configure licensing use the Configure License utility found under Start Menu/All Programs/Quanser for your product.
809	QERR_NO_PTI_VISUALEYEZ_LICENSE	You do not have a valid license for the PTI VisualEyez blockset. To configure licensing use the Configure License utility found under Start Menu/All Programs/Quanser for your product.
810	QERR_PTI_VZSOFT_FAILED_TO_INITIALIZE	The VZSoft device failed to initialize. Make sure the system is setup properly and the VZSoft software is installed.
811	QERR_PTI_VZANALYZER_FAILED_TO_INITIALIZE	The VZAnalyzer device failed to initialize. Make sure the VZAnalyzer software is installed.
812	QERR_PWM_MODES_NOT_COMPATIBLE	At least one PWM channel is in a mode that is incompatible with the other PWM channels. The current card has restrictions on the PWM modes. For example, the card may share the PWM period among all the channels so using duty cycle or time mode along with frequency or period mode is not permitted. See the card's documentation for details.
813	QERR_NP_TRACK_IR_OPEN_FAILED	The TrackIR head tracker failed to initialize. Make sure that TrackIR is running and the Quanser Device ID is registered. Make sure the PATH environment variable is set correctly.
814	QERR_CANNOT_SET_POSITION	The position of the stream cannot be set.
815	QERR_SEMAPHORE_COUNT_EXCEEDED	A semaphore's maximum count has been reached. The semaphore cannot be signaled.
816	QERR_CONNECTION_REFUSED	The remote peer refused the connection, most likely because no server application was listening for connections
817	QERR_MISSING_INTERRUPT_SOURCES	No interrupt sources were specified even though the number of interrupt sources is nonzero.
818	QERR_MISSING_INTERRUPT_OCCURRED_BUFFER	Interrupt sources have been specified but not enough buffer space has been provided for the poll operation.
819	QERR_HIL_POLL_INTERRUPT_NOT_SUPPORTED	The hil_poll_interrupt function and HIL Poll Interrupt block are not supported by this particular card.
820	QERR_MONITOR_ARGUMENT_IS_NULL	The monitor argument to a HIL function is NULL.
821	QERR_INVALID_MONITOR_HANDLE	An invalid monitor handle was passed as an argument to a HIL function.
822	QERR_HIL_MONITOR_CREATE_INTERRUPT_READER_NOT_SUPPORTED	The hil_monitor_create_interrupt_reader function and HIL Interrupt block are not supported by this particular card.
823	QERR_HIL_MONITOR_START_NOT_SUPPORTED	The hil_monitor_start function is not supported by this particular card. If the hil_monitor_create_interrupt_reader function is supported then the hil_monitor_stop function MUST be supported. Contact the device manufacturer.
824	QERR_HIL_MONITOR_STOP_NOT_SUPPORTED	The hil_monitor_stop function is not supported by this particular card. If the hil_monitor_create_interrupt_reader function is supported then the hil_monitor_stop function MUST be supported. Contact the device manufacturer.
825	QERR_HIL_MONITOR_DELETE_NOT_SUPPORTED	The hil_monitor_delete function is not supported by this particular card. If the hil_monitor_create_interrupt_reader function is supported then the hil_monitor_stop function MUST be supported. Contact the device manufacturer.
826	QERR_HIL_MONITOR_READ_INTERRUPT_NOT_SUPPORTED	The hil_monitor_read_interrupt function is not supported by this particular card.
827	QERR_INVALID_INTERRUPT_SOURCE	One of the interrupt sources that was specified is not a valid interrupt source. Interrupt sources are typically divided into ranges according to functionality. Refer to the documentation for your card.
828	QERR_INVALID_INTERRUPT_OPERATION_HANDLE	An invalid interrupt operation handle was passed as an argument to the board-specific HIL driver. Once a monitor has been deleted using hil_monitor_delete the interrupt operation handle is invalid.
829	QERR_INTERRUPT_OPERATION_ARGUMENT_IS_NULL	The interrupt operation argument to a board-specific HIL driver is NULL. This situation should never occur unless the user is calling the board-specific driver directly or memory has been corrupted.
830	QERR_OPTITRACK_INVALID_LICENSE	The license for the Optitrack tools being used is invalid or missing. Make sure you have configured your license.
831	QERR_OPTITRACK_FRAME_UPDATE_FAILED	An attempt to process frames from Optitrack failed. See the QUARC console for additional information.
832	QERR_TOO_MANY_INTERRUPT_SOURCES	Too many interrupt sources were specified.
833	QERR_HIL_SET_CLOCK_FREQUENCY_NOT_SUPPORTED	The hil_set_clock_frequency function is not supported by this particular card.
834	QERR_VICON_CANNOT_CONNECT	Cannot connect to the Vicon DataStream server. Check that the host name is correct and that the Tracker software is running.
835	QERR_VICON_FAILED_TO_SET_STREAM_MODE	The Vicon system failed to set the specified stream mode. Ensure the stream mode is valid and the Tracker software is running.
836	QERR_VICON_ENABLE_UNLABELED_MARKER_DATA_FAILED	The Vicon system failed to enable the unlabeled marker data stream. Make sure your system is connected and the Tracker software is running.
837	QERR_VICON_ENABLE_MARKER_DATA_FAILED	The Vicon system failed to enable the marker data stream. Make sure your system is connected and the Tracker software is running.
838	QERR_VICON_ENABLE_SEGMENT_DATA_FAILED	The Vicon system failed to enable the segment data stream. Make sure your system is connected and the Tracker software is running.
839	QERR_NO_VICON_LICENSE	You do not have a valid license for the Vicon blockset. To configure licensing use the Configure License utility found under Start Menu/All Programs/Quanser for your product.
840	QERR_DAQMX_ONLY_DEVICE_NAMES_SUPPORTED	Using a numeric board identifier for NI cards is not supported on this system. Please use the device name instead.
841	QERR_HIQ_BUILD_NUMBER_MISMATCH	The HiQ firmware build number does not match the HiQ driver build number. Make sure your HiQ driver version is compatible with the HiQ hardware.
842	QERR_INVALID_HOST_PACKET	A Host block appears to be incompatible with the current version of QUARC because it has sent invalid data. It may be necessary to rebuild the model.
843	QERR_DRIVER_TIMED_OUT	The HIL driver timed out trying to communicate with the card. The card may not be working or the version of the driver may not be compatible with the version of the card.
844	QERR_V4L2_VIDIOC_QBUF_FAILED	Failed to enqueue a buffer with the video driver's incoming queue.
845	QERR_V4L2_COULD_NOT_CLOSE	Failed to close the video driver.
846	QERR_V4L2_DEVICE_MISSING	The specified video device could not be found.
847	QERR_V4L2_QUERY_FAILED	Unable to query the video driver for its status.
848	QERR_V4L2_NOT_CAP_DEVICE	The device does not support video capture.
849	QERR_V4L2_NOT_STREAMING_DEVICE	The device does not support video streaming.
850	QERR_V4L2_FORMAT_NOT_VALID	The image format is not valid for the device.
851	QERR_V4L2_VIDIOC_REQBUFS_FAILED	Failed to initiate memory-mapped or user-pointer I/O for the video device.
852	QERR_V4L2_VIDIOC_STREAM_FAILED	Failed to start or stop video capture or streaming.
853	QERR_CASPA_CAPTURE_FAILED	Failed to capture video.
854	QERR_CARD_NOT_ACTIVE	The card is not valid. It may not have been made active during normal simulation in the HIL Initialize block and thus may be uninitialized.
855	QERR_AUTOPILOT_NOT_ACTIVE	The autopilot is not valid. It may not have been made active during normal simulation in the VAL Initialize block and thus may be uninitialized.
856	QERR_PCAN_INVALID_CHANNEL	The channel number specified for the Peak CAN device is not valid. Make sure the correct device type is selected and the channel number is valid.
857	QERR_PCAN_SET_MESSAGE_FILTER_FAILED	The Peak CAN device failed to set the message filter. Make sure the message IDs requested are valid.
858	QERR_INCOMPATIBLE_TARGET_TYPE	The code being downloaded or run is not compatible with the type of target referenced by the target URI. For example, 32-bit code cannot be downloaded to a 64-bit target or vice versa. In Simulink, make sure the system target file selected in the model's active configuration is compatible with the target referred to by the target URI.
859	QERR_PCAN_WRITE_FAILED	The Peak CAN device failed to write a message. Make sure you are connected to a CAN network with proper CAN bus termination resistance and that your baud rate is correct.
860	QERR_JACO_INVALID_JOINT	The joint specified for the Jaco device is outside the valid range.
861	QERR_JACO_JOINT_INITIALIZATION_FAILED	Unable to initialize one of the Jaco joints. Make sure that the Jaco cables are properly connected, the emergency stop is released, and the Jaco power is on.
862	QERR_JACO_ACK_NOT_RECEIVED	Jaco did not send an acknowledge message when one was expected.
863	QERR_SHARING_VIOLATION	The process cannot access the file or object because it is being used by another process.
864	QERR_JACO_READ_FAILED	Failed to read CANbus for the Jaco. Check that the CAN cables are properly connected, the emergency stop is released, and the Jaco power is on.
865	QERR_JACO_JOINT_ADDRESS_INVALID	The Jaco joint address is invalid.
866	QERR_NO_ROBOTICS_LICENSE	You do not have a valid license for the Robotics blockset you are using. To configure licensing use the Configure License utility found under Start Menu/All Programs/Quanser for your product.
867	QERR_INVALID_HOST	The host passed as an argument is invalid. It is likely NULL, indicating the host may not be not connected or listening.
868	QERR_JACO_READ_TIMEOUT	A JACO read timeout expired.
869	QERR_JACO_SHUTDOWN	Unable to complete the operation because the JACO is shutting down.
870	QERR_PERIPHERAL_NOT_FOUND	A peripheral device could not be found. It is possible the device is unplugged or otherwise inoperable.
871	QERR_ENVIRONMENT_VARIABLE_NOT_FOUND	The environment variable could not be found.
872	QERR_VIS_CANNOT_CREATE_FRAME_TIMER	An error occured creating the frame-rate timer.
873	QERR_VIS_CANNOT_CREATE_VISUALIZATION_WINDOW	An error occured creating the visualization window.
874	QERR_VIS_CANNOT_REGISTER_WINDOW	An error occured while attempting to register the windows class. Windows error code %d.
875	QERR_VIS_CANNOT_GET_WINDOW_DC	Cannot create device context. Windows error %d.
876	QERR_VIS_FAILED_TO_SWITCH_TO_FULL_SCREEN	Could not switch to requested fullscreen mode.
877	QERR_VIS_CANNOT_FIND_SUITABLE_PIXEL_FORMAT	Cannot find suitable OpenGL pixel format.
878	QERR_VIS_CANNOT_SET_PIXEL_FORMAT	Cannot set OpenGL pixel format.
879	QERR_VIS_CANNOT_CREATE_OPENGL_CONTEXT	Cannot create OpenGL context.
880	QERR_VIS_CANNOT_CREATE_EXTENDED_OPENGL_CONTEXT	Could not create a rendering context for the requested OpenGL version (%1.1f). A different OpenGL version or updating your video drivers may resolve the issue.
881	QERR_VIS_CANNOT_MAKE_OPENGL_CONTEXT	Cannot make the specified OpenGL context the current context.
882	QERR_VIS_CANNOT_MAKE_EXTENDED_OPENGL_CONTEXT	Could not make the specified OpenGL context the current context for the requested OpenGL version (%1.1f). A different OpenGL version or updating your video drivers may resolve the issue.
883	QERR_VIS_UNABLE_TO_SWAP_GRAPHICS_BUFFERS	Unable to swap graphics buffers.
884	QERR_VIS_TOO_MANY_LIGHTS_IN_SCENE	Too many lights in scene. A maximum of %d lights are supported by OpenGL.
885	QERR_VIS_CANNOT_FIND_VALID_X3D_MESH	Cannot find a valid X3D mesh in %s.
886	QERR_VIS_CANNOT_FIND_SPECIFIED_SHAPE_IN_X3D_MESH	Shape %d could not be found in %s.
887	QERR_VIS_CANNOT_FIND_SPECIFIED_ATTRIBUTE_IN_X3D_MESH	Attribute %s could not be found in %s.
888	QERR_VIS_INVALID_SCENE_FILE_FORMAT	Invalid XML scene file.
889	QERR_VIS_INVALID_MESH_FILE_FORMAT	Invalid mesh file.
890	QERR_VIS_UNSUPPORTED_TEXTURE_FORMAT	The selected texture file %s is not a supported file type.
891	QERR_VIS_TEXTURE_NOT_POWER_OF_2	To improve rendering efficiency, only textures with dimensions that are a power of 2 are supported (eg 512, 1024, 2048, etc). Rectangular bitmaps are acceptable though (eg 512 x 1024).
892	QERR_VIS_TEXTURE_FILE_FORMAT_INVALID	The texture file is recognized, but the file is not in an expected format
893	QERR_VIS_TEXTURE_FILE_INVALID_COLOR_DEPTH	The texture file appears to be valid, but the color depth specified in this file is not supported.
894	QERR_VIS_TEXTURE_FILE_INVALID_COMPRESSION	The texture file appears to be valid, but the compression scheme used is not supported.
895	QERR_VIS_OPENGL_REQUIRED_EXTENSION_NOT_FOUND	A necessary extension was not found for the requested OpenGL version (%1.1f). Updating your video drivers may solve the issue.
896	QERR_VIS_MESH_INVALID_SHAPE_REFERENCE	The shape parameter specified for the mesh %s in the scene file must be greater or equal to zero.
897	QERR_VIS_MESH_INVALID_FACE_COUNT	The face parameter specified for the mesh %s in the scene file must be an integer.
898	QERR_VIS_MESH_INVALID_STRIDE	The stride parameter specified for the mesh %s, attribute %s in the scene file must be greater than zero.
899	QERR_VIS_MESH_INVALID_NUMBER_OF_ATTRIBUTE_ELEMENTS	The number of attribute elements was not the expected stride.
900	QERR_VIS_MESH_INVALID_NUMBER_OF_INDICES	The indices are expected to be a group of 4 numbers for each face.
901	QERR_VIS_MESH_INVALID_NUMBER_OF_NORMALS	The normals are expected to be a group of 3 numbers for each vertex.
902	QERR_VIS_MESH_INVALID_NUMBER_OF_TEXTURE_COORDINATES	The texture coordinates are expected to be a group of 2 numbers for each vertex.
903	QERR_VIS_MESH_INVALID_NUMBER_OF_VERTICES	The vertices are expected to be in groups of 3 numbers.
904	QERR_VIS_MESH_INVALID_INDICES_INDEX	An index references a vertex that is outside of the expected range.
905	QERR_VIS_MESH_ATTRIBUTE_NOT_EQUAL_TO_OTHER_VERTICES	The attribute %s in mesh %s has %d elements which does not match the %d elements found in other attributes or the vertices count in the scene file. If the mesh is marked as a flexible mesh, try rescanning the mesh file to recount the vertices or uncheck the flexible mesh property.
906	QERR_VIS_SHADER_VERTEX_NOT_SET	The vertex shader has not been specified for %s.
907	QERR_VIS_SHADER_FRAGMENT_NOT_SET	The fragment shader has not been specified for %s.
908	QERR_VIS_SHADER_VERTEX_COMPILE_FAILED	Failed to compile the vertex shader file %s.
909	QERR_VIS_SHADER_FRAGMENT_COMPILE_FAILED	Failed to compile the fragment shader file %s.
910	QERR_VIS_SHADER_NOT_COMPILED	Internal error. The graphics engine has attempted to use a shader that has not yet been successfully compiled.
911	QERR_VIS_OLD_SCENE_FILE_VERSION	The scene file appears to be valid, but the version (%2.2f) is not compatible with the installed version of QUARC. Version %2.2f was expected. Please regenerate the scene file from your diagram.
912	QERR_VIS_UNRECOGNIZED_SCENE_FILE_VERSION	The scene file appears to be valid, but the version (%2.2f) is from a newer version of QUARC. Please upgrade this viewer to the most recent version. If this viewer is being used independently of QUARC, an installer for just the viewer is available on the QUARC DVD.
913	QERR_VIS_SCENE_BACKGROUND_COLOR_INVALID	Invalid background color in the scene file.
914	QERR_VIS_SCENE_AMBIENT_COLOR_INVALID	Invalid ambient color specified in the scene file.
915	QERR_VIS_SCENE_FRAMERATE_INVALID	Invalid frame rate specified in scene file.
916	QERR_VIS_SCENE_WIDTH_INVALID	Invalid screen width specified in scene file.
917	QERR_VIS_SCENE_HEIGHT_INVALID	Invalid screen height specified in scene file.
918	QERR_VIS_SCENE_MESH_ID_DUPLICATE	A duplicate mesh ID %s was found. All mesh ID's must be unique.
919	QERR_VIS_SCENE_MESH_ATTRIBUTE_ID_DUPLICATE	A duplicate mesh attribute ID %s was found was found in mesh %s. All mesh attribute ID's must be unique.
920	QERR_VIS_SCENE_TEXTURE_ID_DUPLICATE	A duplicate texture ID %s was found. All mesh ID's must be unique.
921	QERR_VIS_SCENE_SHADER_ID_DUPLICATE	A duplicate shader ID %s was found. All shader ID's must be unique.
922	QERR_VIS_SCENE_SHADER_VARIABLE_ID_DUPLICATE	A duplicate shader variable ID %s was found in shader %s. Shader variable ID's must be unique within each shader.
923	QERR_VIS_SCENE_SHADER_ATTRIBUTE_ID_DUPLICATE	A duplicate shader attribute ID %s was found in shader %s. Shader attribute ID's must be unique within each shader.
924	QERR_VIS_SCENE_NEAR_CLIPPING_INVALID	Near clipping plane must greater than or equal to 0.
925	QERR_VIS_SCENE_FAR_CLIPPING_INVALID	Near clipping plane must greater than 0.
926	QERR_VIS_SCENE_NEAR_FAR_COMBINATION_INVALID	Far clipping plane must be greater than the near clipping plane.
927	QERR_VIS_SCENE_VIEW_ANGLE_INVALID	Camera viewing angle must greater than 0.
928	QERR_VIS_SCENE_KEYBOARD_CAMERA_CONTROL_KEY_INVALID	Unrecognized camera control key.
929	QERR_VIS_SCENE_MOUSE_CAMERA_CONTROL_KEY_INVALID	Unrecognized mouse button.
930	QERR_VIS_SCENE_GESTURE_CAMERA_CONTROL_KEY_INVALID	Unrecognized gesture control.
931	QERR_VIS_SCENE_FOG_MODE_INVALID	The fog mode must be either linear, exp, or exp2.
932	QERR_VIS_SCENE_FOG_DENSITY_INVALID	The fog density must defined and greater or equal to 0.
933	QERR_VIS_SCENE_FOG_COLOR_INVALID	Invalid fog color.
934	QERR_VIS_SCENE_FOG_START_INVALID	The fog start must greater or equal to 0.
935	QERR_VIS_SCENE_FOG_END_INVALID	The fog end must greater than fog start.
936	QERR_VIS_SCENE_FOG_START_OR_END_UNDEFINED	If linear fog is used, the start and end distances must be defined.
937	QERR_VIS_SCENE_OPENGL_VERSION_INVALID	The requested OpenGL version number must greater or equal to 1.0.
938	QERR_VIS_SCENE_OBJECT_REFERENCES_UNKNOWN_MESH_ID	Object %s references an unknown mesh ID %s.
939	QERR_VIS_SCENE_OBJECT_REFERENCES_UNKNOWN_TEXTURE_ID	Object %s references an unknown texture ID %s.
940	QERR_VIS_SCENE_OBJECT_ID_DUPLICATE	A duplicate object ID %s was found. All object ID's must be unique.
941	QERR_VIS_SCENE_ACTOR_REFERENCES_UNKNOWN_MESH_ID	Actor %s references an unknown mesh ID %s.
942	QERR_VIS_SCENE_ACTOR_REFERENCES_UNKNOWN_TEXTURE_ID	Actor %s references an unknown texture ID %s.
943	QERR_VIS_SCENE_ACTOR_REFERENCES_UNKNOWN_OBJECT_ID	Actor %s references an unknown object ID %s.
944	QERR_VIS_SCENE_ACTOR_REFERENCES_UNKNOWN_SHADER_ID	Actor %s references an unknown shader ID %s.
945	QERR_VIS_SCENE_ACTOR_REFERENCES_UNKNOWN_SHADER_VARIABLE_ID	Actor %s references an unknown shader variable ID %s in shader %s.
946	QERR_VIS_SCENE_ACTOR_MISSING_SHADER_ID	Actor %s is missing a Shader reference.
947	QERR_VIS_SCENE_ACTOR_ID_DUPLICATE	A duplicate actor ID %s was found. All actor ID's must be unique.
948	QERR_VIS_SCENE_ACTOR_TYPE_UNKNOWN	Actor type %s not recognized.
949	QERR_VIS_SCENE_ACTOR_POSITION_INVALID	Actor %s's position invalid.
950	QERR_VIS_SCENE_ACTOR_SCALE_INVALID	Actor %s's scale invalid.
951	QERR_VIS_SCENE_ACTOR_FOG_INVALID	Actor %s's fog override must be true or false.
952	QERR_VIS_SCENE_ACTOR_ORIENTATION_INVALID	Actor %s's orientation invalid.
953	QERR_VIS_SCENE_ACTOR_CHILD_AND_SIBLING_PROCESSING_ERROR	An internal error has occured processing the actor relationships. Please report this error to Quanser.
954	QERR_VIS_SCENE_ACTOR_INHERITANCE_INVALID	Actor %s's inheritance must be true or false.
955	QERR_VIS_SCENE_ACTOR_COLOR_INVALID	Actor %s's color invalid.
956	QERR_VIS_SCENE_ACTOR_EMISSIVE_INVALID	Actor %s's emissivity value invalid.
957	QERR_VIS_SCENE_ACTOR_SPECULAR_INVALID	Actor %s's specularity invalid.
958	QERR_VIS_SCENE_ACTOR_SHININESS_INVALID	Actor shininess invalid.
959	QERR_VIS_SCENE_ACTOR_ID_NOT_FOUND	Actor ID not found.
960	QERR_VIS_ACTOR_MESH_POOL_NOT_INITIALIZED	Internal error. Failed attempted to attach a mesh to an actor because the mesh pool is not initialized.
961	QERR_VIS_ACTOR_TEXTURE_POOL_NOT_INITIALIZED	Internal error. Failed attempted to attach a mesh to an actor because the texture pool is not initialized.
962	QERR_VIS_ACTOR_MESH_OUTSIDE_OF_MESH_POOL_BOUNDS	Attempted to attach a mesh that is outside of the array bounds of loaded meshes.
963	QERR_VIS_ACTOR_TEXTURE_OUTSIDE_OF_TEXTURE_POOL_BOUNDS	Attempted to attach a texture that is outside of the array bounds of loaded textures.
964	QERR_VIS_WRONG_MAGIC_NUMBER	The connection was successful, but the received data was not in the expected format.
965	QERR_VIS_COMM_ACTOR_REFERENCE_NOT_VALID	The communications stream refers to more actors than exist in the scene file.
966	QERR_VIS_COMM_ACTOR_PARAMETER_NOT_VALID	The communications stream refers to an invalid actor parameter.
967	QERR_VIS_COMM_DATA_STREAM_PAYLOAD_NOT_OF_EXPECTED_SIZE	Data stream payload is an unexpected size.
968	QERR_VIS_COMM_RECEIVE_BUFFER_TOO_SMALL	The receive buffer is too small for the volume of data needed each frame. Increase the receive buffer size then retry communications.
969	QERR_VIS_COMM_RECEIVE_BUFFER_SIZE_INVALID	The receive buffer size is invalid
970	QERR_VIS_COMM_SEND_BUFFER_SIZE_INVALID	The send buffer size is invalid
971	QERR_VIS_COMM_CONFIGURATION_PAYLOAD_NOT_OF_EXPECTED_SIZE	Configuration payload is an unexpected size.
972	QERR_VIS_OLDER_QUARC_VERSION	The connection was successful, but the model was compiled with an older version of QUARC that is incompatible. Rebuild the model to make it compatible with the current version.
973	QERR_MULTISAMPLE_OPERATION_NOT_SUPPORTED_DURING_DECIMATED_SAMPLING	Multiple samples for the selected task operation are not supported with decimated sampling by this board. Either set the decimation or the number of samples to 1.
974	QERR_HIL_SET_ANALOG_TERMINATION_STATE_NOT_SUPPORTED	The hil_set_analog_termination_state function is not supported by this particular card.
975	QERR_HIL_SET_DIGITAL_TERMINATION_STATE_NOT_SUPPORTED	The hil_set_digital_termination_state function is not supported by this particular card.
976	QERR_HIL_SET_PWM_TERMINATION_STATE_NOT_SUPPORTED	The hil_set_pwm_termination_state function is not supported by this particular card.
977	QERR_HIL_SET_OTHER_TERMINATION_STATE_NOT_SUPPORTED	The hil_set_other_termination_state function is not supported by this particular card.
978	QERR_HIL_AT_LEAST_ONE_CHANNEL_REQUIRED	The HIL function requires at least one channel to be specified.
979	QERR_HIL_INVALID_DIGITAL_DIRECTIONS	The combination of directions specified for the digital channels are not compatible with the capabilities of this particular card. Some cards have digital channels organized into ports for which all channels in a port must have the same direction. Check the documentation for the card.
980	QERR_HIL_WRITE_TERMINATION_STATES_NOT_SUPPORTED	The hil_write_termination_states function is not supported by this particular card.
981	QERR_RCP_INVALID_SMOOTH_GEN_FREQUENCY	The Smooth Signal Generator does not support the frequency entered.
982	QERR_RCP_INVALID_SMOOTH_GEN_AMPLITUDE	The Smooth Signal Generator does not support the amplitude entered.
983	QERR_RCP_INVALID_SMOOTH_GEN_INPUT_SIZE	The input array sizes should be equal and non-zero for the Smooth Signal Generator.
984	QERR_RCP_INVALID_SIGMOID_SAMPLE_TIME	The sample time is not valid for the Sigmoid VI.
985	QERR_MISMATCHED_SCHEDULING_POLICY	The scheduling policy for the thread must match the system scheduling policy on this target operating system.
986	QERR_HIL_DRIVER_NOT_FOUND	Support for the given board type does not appear to be installed. Verify that you have selected the correct card in the HIL Initialize block or hil_open function.
987	QERR_HIL_UNABLE_TO_READ_BITFILE	The FPGA bitfile could not be read. Make sure the FPGA bitfile is actually installed on the target.
988	QERR_HIL_INVALID_FPGA_SIGNATURE	The specified signature does not match the signature of the bitfile. If the bitfile has been recompiled, regenerate the C API and rebuild the application.
989	QERR_HIL_INVALID_RESOURCE_NAME	Either the supplied resource name is invalid as a RIO resource name, or the device was not found. Use MAX to find the proper resource name for the intended device.
990	QERR_FORCE_DIMENSION_OPEN_FAILED	An attempt to open a Force Dimension haptic device failed. Ensure that the Force Dimension device is powered on and has been calibrated.
991	QERR_FORCE_DIMENSION_READ_FAILED	An attempt to read from the Force Dimension haptic device failed.
992	QERR_FORCE_DIMENSION_WRITE_FAILED	An attempt to write to the Force Dimension haptic device failed.
993	QERR_FORCE_DIMENSION_CLOSE_FAILED	An attempt to close a Force Dimension haptic device failed.
994	QERR_FORCE_DIMENSION_NOT_CALIBRATED	The Force Dimension haptic device has not been calibrated. Ensure that the device is properly calibrated before use.
995	QERR_NO_FORCE_DIMENSION_LICENSE	You do not have a valid license for the Force Dimension blockset. To configure licensing use the Configure License utility found under Start Menu/All Programs/Quanser for your product.
996	QERR_RCP_CHASSIS_NOT_FOUND	The driver could not determine the chassis attached to the real-time controller.
997	QERR_RCP_CHASSIS_NOT_SUPPORTED	The NI chassis currently in use is not supported by this particular driver. Check the documentation to ensure a compatible chassis is in use.
998	QERR_RCP_INCORRECT_MODULE	One or more of the modules in the NI chassis do not match the hardware configuration selected in the HIL Initialize. Be sure the correct modules are being used. Please correct the hardware configuration or select the proper configuration in the HIL Initialize block.
999	QERR_RCP_MODULE_IO_ERROR	One or more of the modules in the NI chassis is causing an error which prevents I/O from being performed.
1000	QERR_FPGA_ALREADY_RUNNING	The FPGA is already running.
1001	QERR_RESOURCE_NOT_INITIALIZED	A required resource was not initialized.
1002	QERR_CORRUPT_FPGA_BITFILE	The specified bitfile is invalid or corrupt.
1003	QERR_FPGA_BUSY	Operation could not be performed because the FPGA is busy. Stop all the activities on the FPGA before requesting this operation.
1004	QERR_FPGA_BUSY_C_API	Operation could not be performed because the FPGA is busy operating in FPGA Interface C API mode. Stop all the activities on the FPGA before requesting this operation.
1005	QERR_FPGA_BUSY_SCAN_INTERFACE	The chassis is in Scan Interface programming mode. In order to run FPGA VIs, you must go to the chassis properties page, select FPGA programming mode, and deploy settings.
1006	QERR_FPGA_BUSY_FPGA_INTERFACE	Operation could not be performed because the FPGA is busy operating in FPGA Interface mode. Stop all the activities on the FPGA before requesting this operation.
1007	QERR_FPGA_BUSY_INTERACTIVE	Operation could not be performed because the FPGA is busy operating in Interactive mode. Stop all the activities on the FPGA before requesting this operation.
1008	QERR_FPGA_BUSY_EMULATION	Operation could not be performed because the FPGA is busy operating in Emulation mode. Stop all the activities on the FPGA before requesting this operation.
1009	QERR_QBUS_NO_MODULES_FOUND	No QBus modules could be detected.
1010	QERR_QBUS_UNRECOGNIZED_MODULE	An unrecognized QBus module was found.
1011	QERR_SPI_INSUFFICIENT_BYTES_TO_SEND_AND_RECEIVE	The given buffer is too small to do a single send or receive for this protocol. The protocol uses a word length larger than the number of bytes supplied.
1012	QERR_PARITY_NOT_SUPPORTED	The selected serial port does not support parity checking. Set the parity option on the URI to 'none'.
1013	QERR_HARDWARE_FLOW_CONTROL_NOT_SUPPORTED	The selected serial port does not support hardware flow control. Set the flow option on the URI to 'none' or 'software' (if supported).
1014	QERR_SOFTWARE_FLOW_CONTROL_NOT_SUPPORTED	The selected serial port does not support software flow control. Set the flow option on the URI to 'none' or 'hardware' (if supported).
1015	QERR_DTR_DSR_NOT_SUPPORTED	The selected serial port does not support the data-terminal-ready (DTR) and data-set-ready (DSR) lines. Set the dsr option on the URI to 'off'.
1016	QERR_PARITY_VALUE_NOT_SUPPORTED	The value specified for the parity is not supported by the given serial port. Use a different parity setting if possible or select 'none' for no parity checking.
1017	QERR_STOP_BITS_VALUE_NOT_SUPPORTED	The value specified for the stop bits is not supported by the given serial port. Use a different number of stop bits if possible. A value of 1 is recommended.
1018	QERR_WORD_LENGTH_VALUE_NOT_SUPPORTED	The value specified for the word length is not supported by the given serial port. Use a different word length if possible. A value of 8 is recommended.
1019	QERR_NO_DATA_TO_SEND	There is no data to send. It is not possible to send zero-length arrays. If data will never be sent then configure the send options to not send data at all. Setting the enable input to false is not enough because the enable input is only intended to temporarily enable or disable transmission. If the stream is configured to send data then a valid data type must be connected even if the enable input is false.
1020	QERR_RCP_MISSING_MODULE	One or more of the modules in the NI chassis that is required by the hardware configuration selected in the HIL Initialize is missing. Please correct the hardware configuration or select the proper configuration in the HIL Initialize block.
1021	QERR_RCP_MISSING_ANALOG_INPUT_MODULE	The module in the NI chassis required for the selected channels of analog input is missing.
1022	QERR_RCP_MISSING_ANALOG_OUTPUT_MODULE	The module in the NI chassis required for the selected channels of analog output is missing. Make sure these channels are not being written by the HIL Initialize block by unchecking the Initial and Final output fields of the Analog Outputs tab.
1023	QERR_RCP_MISSING_ENCODER_INPUT_MODULE	The module in the NI chassis required for the selected channels of encoder input is missing.
1024	QERR_RCP_MISSING_PWM_OUTPUT_MODULE	The module in the NI chassis required for the selected channels of PWM output is missing. Make sure these channels are not being written by the HIL Initialize block by unchecking the Initial and Final output fields of the PWM Outputs tab.
1025	QERR_RCP_MISSING_DIGITAL_INPUT_MODULE	The module in the NI chassis required for the selected channels of digital input is missing.
1026	QERR_RCP_MISSING_DIGITAL_OUTPUT_MODULE	The module in the NI chassis required for the selected channels of digital output is missing. Make sure these channels are not being written by the HIL Initialize block by unchecking the Initial and Final output fields of the Digital I/O tab.
1027	QERR_RCP_MISSING_OTHER_INPUT_MODULE	The module in the NI chassis required for the selected channels of other input is missing.
1028	QERR_RCP_MISSING_OTHER_OUTPUT_MODULE	The module in the NI chassis required for the selected channels of other output is missing. Make sure these channels are not being written by the HIL Initialize block by unchecking the Initial and Final output fields of the Other Outputs tab.
1029	QERR_DEVICE_NOT_CONNECTED	The device is not connected. If the device was connected then somehow that connection has been lost.
1030	QERR_TOO_MANY_PROPERTIES	Too many properties were specified.
1031	QERR_PSTREAM_NOT_VARIABLE_SIZE	The persistent stream has not been configured for variable-size signals in the direction attempted.
1032	QERR_PSTREAM_VARIABLE_SIZE	The persistent stream has been configured for variable-size signals in the direction attempted.
1033	QERR_INVALID_DIMENSIONS	The dimensions exceed the maximum dimensions specified.
1034	QERR_LEAPMOTION_NOT_FOUND	The Leap Motion device cannot be found on the system.
1035	QERR_CANNOT_RESET_ENCODER_TO_NONZERO_VALUE	The encoder cannot be reset to a non-zero value on this device.
1036	QERR_ENCODER_INPUT_ERROR	An error has occurred reading an encoder input. Make sure the encoder is connected reliably, there are no ground loops and signal noise is minimized.
1037	QERR_STALL_OCCURRED	A stall condition was detected. Please ensure that your device is free to move and is functioning properly.
1038	QERR_ONLY_I2C_MASTER_MODE_SUPPORTED	Only the I2C master mode is supported by the device being used for I2C communications. Different hardware is required for slave mode.
1039	QERR_NO_DEVICE_ADDRESS	No device address was specified. See the options for the communications protocol.
1040	QERR_NO_ACKNOWLEDGEMENT	Device did not send an acknowledgement. Device may not be present or an error may have occurred.
1041	QERR_NO_KINECT_SENSOR	No Kinect sensor was detected with the given index or identifier.
1042	QERR_INVALID_KINECT	Invalid Kinect sensor.
1043	QERR_KINECT_NOT_FOUND	The corresponding Kinect Initialize could not be found. Make sure that a Kinect Initialize block is present in the model.
1044	QERR_KINECT_FEATURE_NOT_ENABLED	The Kinect has been initialized without at least one of the requested features. Some of the features will not be available.
1045	QERR_KINECT_NOT_INITIALIZED	The Kinect sensor has not been initialized.
1046	QERR_KINECT_ALREADY_INITIALIZED	The Kinect sensor is already initialized so the requested settings can no longer be configured. Set options before calling the kinect_initialize function.
1047	QERR_RESOLUTION_NOT_SUPPORTED	The selected image resolution is not supported.
1048	QERR_NO_SPI_CHIP_SELECT	No SPI chip select signal was chosen using the frame or slave options of the URI. The current hardware requires that a chip select be used.
1049	QERR_MULTIPLE_SPI_CHIP_SELECTS	More than one SPI chip select signal was chosen by setting both the frame and slave options of the URI. The current hardware does not support both at the same time. Choose one or the other.
1050	QERR_UNSUPPORTED_I2C_OPERATION	The I2C protocol for the selected target only supports combined write-read messages. Other combinations of read and write operations are not supported in exclusive mode.
1051	QERR_DIGITAL_EXPIRATION_STATE_NOT_ZERO	This board only supports resetting the digital outputs to zero when the watchdog expires.
1052	QERR_PWM_EXPIRATION_STATE_NOT_ZERO	This board only supports resetting the PWM outputs to zero when the watchdog expires.
1053	QERR_OTHER_EXPIRATION_STATE_NOT_ZERO	This board only supports resetting the other outputs to zero when the watchdog expires.
1054	QERR_KINECT_NOT_SUPPORTED	The type of Kinect selected is not currently supported on this target.
1055	QERR_INVALID_MICO	Invalid object. A Kinova MICO robot object cannot be used after it has been closed.
1056	QERR_MICO_INVALID_JOINT	The joint specified for the Kinova MICO device is outside the valid range.
1057	QERR_MICO_MESSAGE_INVALID	The Kinova MICO serial link message is invalid.
1058	QERR_MICO_FIRMWARE_VERSION_NOT_READ	The Kinova MICO firmware version could not be read. Ensure the robot arm is powered up and properly connected to the external computer.
1059	QERR_MICO_FIRMWARE_VERSION_NOT_SUPPORTED	The Kinova MICO joint and/or finger firmware version number is not supported.
1060	QERR_MICO_ERROR	Error from the Kinova MICO device.
1061	QERR_MICO_ERROR_CANNOT_READ	Error from the Kinova MICO device: cannot perform the read operation.
1062	QERR_MICO_ERROR_CANNOT_WRITE	Error from the Kinova MICO device: cannot perform the write operation.
1063	QERR_INVALID_ROS	The ROS property object is not valid. A ROS property object cannot be used after it has been closed.
1064	QERR_ROS_ERROR	The ROS system is inaccessible.
1065	QERR_INVALID_ROS_TOPIC	The ROS topic is not recognized.
1066	QERR_ROS_SHUTDOWN	The ROS system is shutdown.
1067	QERR_ROS_INIT_ERROR	There was a problem initializing ROS.
1068	QERR_INVALID_BOARD_VERSION	Version information retrieved from the HIL board does not match the driver. It may be necessary to update the QUARC software to get the latest drivers.
1069	QERR_UNABLE_TO_PROGRAM_FIRMWARE	Unable to program firmware.
1070	QERR_WRONG_NUMBER_OF_BYTES_RECEIVED	The wrong number of bytes was received from a device or peer. This mismatch may indicate a driver or protocol incompatibility.
1071	QERR_INCOMPATIBLE_HARDWARE_VERSION	The hardware version is incompatible with the firmware being flashed. No changes were made to the firmware.
1072	QERR_INCOMPATIBLE_FIRMWARE_IMAGE	The version of the firmware image is not compatible with the driver. No changes were made.
1073	QERR_BOARD_ALREADY_OPEN	The HIL board is already opened by another process. The board does not support access from more than one process at the same time.
1074	QERR_UNSUPPORTED_VIDEO_FORMAT	The video format is not supported. This may be due to the frame rate, frame size or native video formats of the device or source.
1075	QERR_INVALID_PACKET	The packet format is invalid.
1076	QERR_INVALID_CHECKSUM	The checksum is invalid. The data may have been corrupted.
1077	QERR_NEWER_VERSION_INSTALLED	A newer version is installed. No changes have been made.
1078	QERR_INVALID_ALIGNMENT_TYPE	The alignment type is invalid.
1079	QERR_INVALID_ALLOCATION_CHUNK	The maximum allocation chunk is invalid.
1080	QERR_INVALID_BUFFER_MODE	The buffer mode is invalid.
1081	QERR_INVALID_COMPONENT_ID	The component ID is invalid.
1082	QERR_INVALID_CROP_REQUEST	The crop request is invalid.
1083	QERR_DCT_COEFFICIENT_OUT_OF_RANGE	The DCT coefficient out of range.
1084	QERR_IDCT_SIZE_NOT_SUPPORTED	The specified IDCT output block size is not supported.
1085	QERR_MISMATCHED_SAMPLING_RATIO	The sampling ratio is mismatched.
1086	QERR_INVALID_HUFFMAN_TABLE	The Huffman table definition is invalid.
1087	QERR_INVALID_INPUT_COLORSPACE	The input colorspace is invalid.
1088	QERR_INVALID_JPEG_COLORSPACE	The JPEG colorspace is invalid.
1089	QERR_INVALID_MARKER_LENGTH	The marker length is invalid.
1090	QERR_INVALID_MCU_SIZE	The sampling factors are too large for an interleaved scan.
1091	QERR_INVALID_POOL_ID	The memory pool code is invalid.
1092	QERR_INVALID_PRECISION	The specified data precision is not supported.
1093	QERR_INVALID_PROGRESSION	The progressive image parameters are invalid.
1094	QERR_INVALID_PROGRESSIVE_SCRIPT	The progressive image parameters at the scan script entry are invalid.
1095	QERR_INVALID_SAMPLING	The sampling factors are invalid.
1096	QERR_INVALID_SCAN_SCRIPT	The scan script is invalid.
1097	QERR_INVALID_LIBRARY_STATE	A library call was made when the library is not in the proper state. Call sequence is likely invalid.
1098	QERR_INVALID_STRUCT_SIZE	The structure size was invalid. The library may not be the same version as the caller.
1099	QERR_INVALID_VIRTUAL_ACCESS	The virtual array access was invalid.
1100	QERR_CANNOT_SUSPEND	Suspension is not allowed at this point.
1101	QERR_CCIR601_NOT_IMPLEMENTED	CCIR601 sampling is not implemented yet.
1102	QERR_COLOR_COMPONENT_COUNT	There are too many color components.
1103	QERR_COLOR_CONVERSION_NOT_IMPLEMENTED	The specified color conversion is not supported.
1104	QERR_INVALID_DAC_INDEX	Invalid DAC index.
1105	QERR_INVALID_DAC_VALUE	Invalid DAC value.
1106	QERR_INVALID_DHT_INDEX	Invalid DHT index.
1107	QERR_INVALID_DQT_INDEX	Invalid DQT index.
1108	QERR_EMPTY_IMAGE	The image is empty. Empty images are not currently supported.
1109	QERR_EMS_READ_FAILED	A read from the EMS failed.
1110	QERR_EMS_WRITE_FAILED	A write to the EMS failed.
1111	QERR_END_OF_INPUT_EXPECTED	The end of the input was expected. There is too much input data.
1112	QERR_FILE_READ_FAILED	An error occurred reading from a file.
1113	QERR_FILE_WRITE_FAILED	An error occurred writing to a file. There may not be enough disk space.
1114	QERR_FRACTIONAL_SAMPLING_NOT_IMPLEMENTED	Fractional sampling is not implemented yet.
1115	QERR_HUFFMAN_TABLE_OVERFLOW	The Huffman code size table overflowed.
1116	QERR_HUFFMAN_MISSING_CODE	A Huffman code table entry was missing.
1117	QERR_IMAGE_TOO_BIG	The image was too big.
1118	QERR_MISMATCHED_QUANTIZATION_TABLE	It is not possible to transcode due to multiple uses of the quantization table.
1119	QERR_MISSING_SCAN_DATA	The scan script does not transmit all data.
1120	QERR_COLOR_MODE_CHANGE_INVALID	The color quantization mode change was invalid.
1121	QERR_FEATURE_NOT_COMPILED	The requested feature was omitted at compile time.
1122	QERR_NO_ARITHMETIC_TABLE	An arithmetic table was not defined.
1123	QERR_BACKING_STORE_NOT_SUPPORTED	A backing store is not supported.
1124	QERR_NO_HUFFMAN_TABLE	A Huffman table was not defined.
1125	QERR_NO_QUANTIZATION_TABLE	A quantization table was not defined.
1126	QERR_INVALID_FILE_TYPE	The file type is wrong.
1127	QERR_TOO_MANY_QUANTIZATION_COMPONENTS	There were too many color components to quantize.
1128	QERR_CANNOT_QUANTIZE_TO_FEW_COLORS	It is not possible to quantize to so few colors.
1129	QERR_CANNOT_QUANTIZE_TO_MANY_COLORS	It is not possible to quantize to so many colors.
1130	QERR_SOF_DUPLICATE	There are too many SOF markers. The file structure is invalid.
1131	QERR_NO_SOS_MARKER	The SOS marker is missing. The file structure is invalid.
1132	QERR_SOF_NOT_SUPPORTED	The SOF marker type is not supported.
1133	QERR_SOI_DUPLICATE	There are too many SOI markers. The file structure is invalid.
1134	QERR_SOS_BEFORE_SOF	An SOS marker occurred before an SOF marker. The file structure is invalid.
1135	QERR_CANNOT_CREATE_TEMPORARY_FILE	Failed to create a temporary file.
1136	QERR_CANNOT_READ_TEMPORARY_FILE	Failed to read a temporary file.
1137	QERR_CANNOT_SEEK_TEMPORARY_FILE	Failed to seek on a temporary file.
1138	QERR_CANNOT_WRITE_TEMPORARY_FILE	Failed to write to a temporary file. There may not be enough disk space.
1139	QERR_TOO_LITTLE_DATA	Not enough data was supplied.
1140	QERR_MARKER_NOT_SUPPORTED	The marker type is not supported.
1141	QERR_VIRTUAL_ARRAY_BUG	The virtual array controller is confused.
1142	QERR_IMAGE_TOO_WIDE	The image is too wide for this implementation.
1143	QERR_XMS_READ_FAILED	A read from the XMS failed.
1144	QERR_XMS_WRITE_FAILED	A write to the XMS failed.
1145	QERR_NO_DESTINATION_SET	The operation cannot be performed because no destination has been configured for the operation.
1146	QERR_COMPRESSED_IMAGE_TOO_LARGE	The compressed image is too large to fit in the destination. If you are using the Image Compress block then make the output dimension larger.
1147	QERR_HIL_NAME_NOT_ASSIGNED	The specified virtual name for the HIL card has not been assigned to an actual device.
1148	QERR_HIL_SET_ANALOG_INPUT_CONFIGURATION_NOT_SUPPORTED	The hil_set_analog_input_configuration function is not supported by this particular card.
1149	QERR_MISSING_ANALOG_INPUT_CONFIGURATION	No configurations were specified when setting the analog input configuration, even though the number of channels indicated was non-zero.
1150	QERR_INVALID_ANALOG_INPUT_CONFIGURATION	One of the configurations specified for an analog input channel is not valid for the selected hardware.
1151	QERR_INCOMPATIBLE_HARDWARE	The hardware appears to be incompatible with the board type selected.
1152	QERR_BAUD_RATE_EXCEEDS_MAXIMUM	The baud rate exceeds the maximum baud rate set when the stream was created.
1153	QERR_MISMATCHED_PWM_PERIOD_IN_BANK	One of the PWM periods specified does not match the period of the other channels. This card only allows one PWM period to be set for all PWM channels in a bank.
1154	QERR_CALIBRATION_FAILED	Sensor calibration failed for some reason. Try running the model again.
1155	QERR_INVALID_I2C_STATE	The I2C channel has entered an unexpected state.
1156	QERR_PARITY_ERROR	A parity error occurred
1157	QERR_FRAMING_ERROR	A framing error occurred
1158	QERR_FILE_TOO_LARGE	The file has become too large for the given file format.
1159	QERR_INVALID_MEDIA_TYPE	The media type is not supported, either because parameters such as the frame rate are invalid or there is no codec for that media type.
1160	QERR_DEVICE_DISCONNECTED	Device was disconnected, this can be caused by outside intervention, by internal firmware error or due to insufficient power.
1161	QERR_OS_ERROR	Error was returned from the underlying OS-specific layer.
1162	QERR_WRONG_CALL_SEQUENCE	Function precondition was violated. Functions were called in the wrong order.
1163	QERR_DEVICE_RECOVERING	Device is in recovery mode and might require firmware update.
1164	QERR_DEVICE_IO_ERROR	I/O device failure.
1165	QERR_PROPERTY_IS_READ_ONLY	The property is read-only. It cannot be set.
1166	QERR_IMAGE_STREAM_NOT_FOUND	The specified image stream could not be found. The stream type may not be supported by the camera or the stream index is too large.
1167	QERR_MISSING_REALSENSE	The RealSense 2 library is not installed.
1168	QERR_EMITTER_CANNOT_BE_DISABLED	The laser emitter on the depth camera cannot be disabled.
1169	QERR_INVALID_CAMERA_PROPERTY_VALUE	The property value specified is not supported by the camera. Check that the value corresponds with the camera selected.
1170	QERR_INVALID_STRIDE	The image stride was either too small or is not a multiple of the pixel size.
1171	QERR_INVALID_FILE_HANDLE	The file handle is not valid. An attempt was made to use a file that is not open.
1172	QERR_BAROMETER_NOT_RESPONDING	The barometer is not responding. The device may have been damaged.
1173	QERR_MAGNETOMETER_NOT_RESPONDING	The magnetometer is not responding. The device may have been damaged.
1174	QERR_CONFLICTING_DIGITAL_MODES	The specified digital IO is configured for a special purpose (e.g. PWM, Encoder, SPI, I2C, UART). Therefore it cannot be used as the specified function. Refer to the device documentation for precedents and limitations of the generic digital IO.
1175	QERR_ELVISIII_TOP_BOARD_NO_POWER	The NI ELVIS III top board is not powered, the top board must be powered before this board can be used.
1176	QERR_ELVISIII_EEPROM_ERROR	Failed to access the NI ELVIS III top board EEPROM during initialization. Try power cycle the ELVIS III. If the error persists, then the problem is likely a hardware fault.
1177	QERR_ELVISIII_TOP_BOARD_INCOMPATIBLE	The top board attached to the NI ELVIS III is not compatbile with the driver, make sure the correct top board is attached that matches the board type as selected in HIL Initialize.
1178	QERR_NO_ELVISIII_LICENSE	You do not have a valid license for the NI ELVIS III you are using. Make sure you install QUARC with a license file that has NI ELVIS III support, and then run NI MAX to install QUARC on the NI ELVIS III.
1179	QERR_NO_RIO_GENERIC_LICENSE	You do not have a valid license for the myRIO or generic NI ELVIS III board. Make sure you install QUARC with a license file that has myRIO or generic NI ELVIS III board support, and then run NI MAX to install QUARC on the myRIO or NI ELVIS III.
1180	QERR_BORDER_TYPE_NOT_SUPPORTED	The border type selected for the operation is not supported by the current operation.
1181	QERR_FILTER_MASK_SIZE_NOT_SUPPORTED	The mask size specified for the filter is not supported. Many filter operations only support 3x3 or 5x5 mask sizes. The mask should also be smaller than the image.
1182	QERR_INVALID_ALGORITHM_HINT	The specified algorithm hint is not supported.
1183	QERR_INVALID_ROUNDING_MODE	The specified rounding mode is not supported.
1184	QERR_INVALID_DATA_TYPE	The specified data type is not supported.
1185	QERR_CANNOT_AUTODETECT_DSM_EXTERNAL	The type of DSM protocol cannot be auto-detected for external remotes.
1186	QERR_PROPERTY_NOT_SUPPORTED	The specified property is not supported.
1187	QERR_CANNOT_INITIALIZE_OPENVR	The OpenVR cannot be properly initialized due to an error.
1188	QERR_HIL_TASK_SET_BUFFER_OVERFLOW_MODE_NOT_SUPPORTED	The hil_task_set_buffer_overflow_mode function is not supported by this particular card.
1189	QERR_HIL_TASK_GET_BUFFER_OVERFLOWS_NOT_SUPPORTED	The hil_task_get_buffer_overflows function is not supported by this particular card.
1190	QERR_MACRO_NOT_TERMINATED	A macro was missing the closing parenthesis.
1191	QERR_INVALID_MACRO_NAME	The macro does not match any of the standard macro names or the name of an environment variable.
1192	QERR_UNSUPPORTED_IMAGE_CONVERSION	Conversion between the two image formats selected is not currently supported.
1193	QERR_CANNOT_CONVERT_CHARACTER	A character was encountered that cannot be converted.
1194	QERR_NO_DEVICE	The device is not available. Check that the device is plugged in or has not been reset.
1195	QERR_PROTOCOL_BUFFER_TOO_SMALL	The buffer for the underlying communication protocol is too small to send or receive the data requested. Try using the sndsize, rcvsize, bufsize or memsize options of the URI to increase the requisite buffer size.
1196	QERR_INVALID_CALIBRATION	The calibration data appears to be invalid.
1197	QERR_RANGING_SENSOR_ERROR	The ranging sensor could not detect the range due to an error.
1198	QERR_IO_ERROR	An I/O error occurred.
1199	QERR_DIVISION_BY_ZERO	A division by zero occurred.
1200	QERR_DEVICE_INITIALIZATION_FAILED	Device initialization failed.
1201	QERR_DEVICE_DRIVER_INCOMPATIBLE	The device driver appears to be incompatible with the device.
1202	QERR_HARDWARE_FAILURE	The hardware appears to have failed. It is either not responding, or not responding as expected. Try powering down and back up.
1203	QERR_SCALING_LOSES_ASPECT_RATIO	The scaling of the width and height is not the same. The aspect ratio will be changed, which is not currently supported.
1204	QERR_SCALE_FACTOR_NOT_SUPPORTED	The given scale factor is not currently supported.
1205	QERR_BUFFER_TOO_SMALL	The supplied buffer is too small for the data requested.
1206	QERR_INVALID_REALSENSE_VERSION	The version of the Intel RealSense API expected does not match the version that is installed. The versions must match exactly.
1207	QERR_INVALID_JSON	The JSON is invalid. JSON values must be objects, arrays, numbers, strings, true, false or null.
1208	QERR_NO_CODEC_FOUND	No suitable codec was found to encode or decode the content.
1209	QERR_CANNOT_START_XMLRPC_SERVER	The XMLRPC server cannot be started.
1210	QERR_CANNOT_START_XMLRPC_CLIENT	The XMLRPC client cannot be started.
1211	QERR_CANNOT_TALK_TO_ROS_MASTER	The XMLRPC client cannot establish communication with ROS master.
1212	QERR_INVALID_ROS_MASTER_RESPONSE	The ROS master has responded with invalid response.
1213	QERR_ROS_MASTER_CALLER_ERROR	The ROS master indicates that the ROS master API was called with caller error. In general, this means that the master/slave did not attempt to execute the action.
1214	QERR_ROS_MASTER_CALLER_FAILURE	The ROS master indicates that the ROS master API failed to complete completely. In general, this means that the master/slave attempted the action and failed, and there may have been side-effects as a result.
1215	QERR_INVALID_ROS_SLAVE_REQUEST	The ROS slave API request is invalid.
1216	QERR_UNSUPPORTED_ROS_PROTOCOL	The requested ROS protocol is not supported. Currently this node only supports TCPROS and UDPROS protocols.
1217	QERR_ROS_NOT_ACTIVE	The ROS node is not valid. It may not have been made active during normal simulation in the ROS Initialize block and thus may be uninitialized.
1218	QERR_CAMERA_IN_USE	The camera is already in use by another application.
1219	QERR_MUTEX_ALREADY_EXISTS	The named mutex already exists.
1220	QERR_MUTEX_ABANDONED	The mutex was owned by another thread but that thread terminated while the lock was still held so the mutex has been abandoned. The caller now owns the mutex but should check for consistency of the shared resource.
1221	QERR_MUTEX_NOT_FOUND	The named mutex could not be found.
1222	QERR_IMAGE_DATA_TYPE_NOT_SUPPORTED	The data type selected is not currently supported by the chosen image format.
1223	QERR_PROTOCOL_DRIVER_NOT_FOUND	Support for the given protocol type does not appear to be installed. Verify that you have entered the correct URI for the Stream blocks or stream_connect/stream_listen functions.
1224	QERR_CPU_GPIO_IN_USE	A GPIO is in use by another application. Some applications on Linux-based systems use the old sysfs (/sys/class/gpio) file system for GPIO. If a GPIO is exported it cannot be used by QUARC. Try rebooting the target.
1225	QERR_OPTITRACK_LIBRARY_OPEN_FAILED	The Motive library failed to open. Make sure you have the Motive software installed and the appropriate environment variables (refer to the device help page) set correctly.
1226	QERR_OPTITRACK_UNSUPPORTED_API_FUNCTION	The required Motive API is not available. Make sure you have the correct version of the Motive software installed. E.g. older Motive software does not support loading of user profile (.xml or .motive) file and must use trackable (.tra) file for rigid bodies definitions.
1227	QERR_OPTITRACK_UNSUPPORTED_RIGID_BODY_DEF_FILE	The specified rigid body definition is not supported. Currently only .xml, .motive, and .tra files are supported.
1228	QERR_OPTITRACK_INVALID_PROFILE_FILE	Unable to load Motive user profile file. Make sure the file path is correct.
1229	QERR_UNABLE_TO_LOAD_CUDA_KERNEL	Unable to load CUDA kernel. The installed CUDA version may be incompatible with the CUDA code.
1230	QERR_UNABLE_TO_GET_CUDA_FUNCTION	Unable to get CUDA function from kernel. The mangled function name is likely incorrect.
1231	QERR_CAN_BUS_IDENTIFIER_TOO_LARGE	The CAN bus identifier is too large for the standard frame format. Use the flexible=1 option on the URI to allow extended CAN FD frames if your CAN device supports it.
1232	QERR_INVALID_IPV6_ADDRESS	The IPv6 address is invalid or incomplete. On Linux systems, the zone identifier must be used by clients to identify the network interface (e.g. eth0) through which a link local address is connecting e.g. tcpip6://[fe80::abcd:beef:1234:5678%eth0]:18000
1233	QERR_CANNOT_GET_CAMERA_PROPERTIES	Unable to get the properties of the camera. This may indicate a hardware issue.
1234	QERR_INVALID_CUDA_CONTEXT	The CUDA context has not been initialized. This may indicate version mismatches.
1235	QERR_MAP_FAILED	Failed to perform a mapping or register operation.
1236	QERR_RESOURCE_IN_USE	The desired resource is already in use for another operation.
1237	QERR_CUDA_CONTEXT_IN_USE	The CUDA context passed to an API call is already in use by another thread.
1238	QERR_CUDA_COMPILATION_FAILED	Compilation of CUDA PTX code failed. The CUDA PTX source is invalid or the JIT PTX compilation library was not found.
1239	QERR_INVALID_GRAPHICS_CONTEXT	The OpenGL or DirectX graphics context is invalid.
1240	QERR_UNRECOVERABLE_ERROR	An unrecoverable error occurred. The application will need to be re-run.
1241	QERR_INCOMPATIBLE_TEXTURING_MODE	The CUDA kernel launched using an incompatible texturing mode.
1242	QERR_INVALID_PEER_ACCESS	The peer access was invalid. It may not be enabled or may have already been enabled.
1243	QERR_OBJECT_ALREADY_INITIALIZED	The object was already initialized and cannot be re-initialized.
1244	QERR_TOO_MANY_CUDA_BLOCKS	Too many CUDA blocks were used with a cooperative kernel.
1245	QERR_MISSING_FGLOVE	The 5DT Data Glove SDK does not appear to be installed or is not in the PATH. See the help for the FDT Data Glove block for the installation requirements. Note that a reboot may be required after installing the SDK.
1246	QERR_MISSING_FORCE_DIMENSION	The Force Dimension SDK does not appear to be installed or is not in the PATH. See the help for the Force Dimension Write block for the installation requirements. Note that a reboot may be required after installing the SDK.
1247	QERR_MISSING_FLY_CAPTURE	The FlyCapture SDK does not appear to be installed or is not in the PATH. See the help for the PGR Grab Image block for the installation requirements. Note that a reboot may be required after installing the SDK.
1248	QERR_MISSING_PCAN	The PCAN-Basic API does not appear to be installed or is not in the PATH. See the help for the Peak CAN block for the installation requirements. Note that a reboot may be required after installing the SDK.
1249	QERR_MISSING_VICON	The Vicon DataStream SDK does not appear to be installed or is not in the PATH. See the help for the Vicon block for the installation requirements. Note that a reboot may be required after installing the SDK.
1250	QERR_MISSING_LEAPMOTION	The Leap SDK does not appear to be installed or is not in the PATH. See the help for the Leap Motion block for the installation requirements. Note that a reboot may be required after installing the SDK.
1251	QERR_MISSING_CANPCI	The CANPCI SDK does not appear to be installed or is not in the PATH. See the help for the CANPCI block for the installation requirements. Note that a reboot may be required after installing the SDK.
1252	QERR_MISSING_SCHUNK	The Schunk PowerCube software does not appear to be installed or is not in the PATH. See the help for the Schunk Gripper block for the installation requirements. Note that a reboot may be required after installing the SDK.
1253	QERR_MISSING_FALCON	The HDAL software does not appear to be installed or is not in the PATH. See the help for the Novint Falcon block for the installation requirements. Note that a reboot may be required after installing the SDK.
1254	QERR_NO_THREAD_CANCELLATION_STATE	The calling thread does not support setting the cancellation state of the thread. The thread was not created with qthread_create.
1255	QERR_MISSING_OPENVR	The OpenVR SDK software does not appear to be installed or is not in the PATH. See the help for the Tracker block for the installation requirements. Note that a reboot may be required after installing the SDK.
1256	QERR_UNSUPPORTED_AUDIO_FORMAT	The audio format is not supported. This may be due to a missing audio codec on some targets.
1257	QERR_CORRUPT_FILE	The file is corrupt or is not the expected format.
1258	QERR_WRONG_MODE_FOR_TRIGGERING	The session is in the wrong mode for triggering.
1259	QERR_CAMERA_NAME_NOT_ASSIGNED	The specified virtual name for the camera has not been assigned to an actual device.
1260	QERR_NOT_HIL_PROXY	The server to which a connection was attempted is not a HIL proxy server or HIL simulation.
1261	QERR_NOT_VIDEO3D_PROXY	The server to which a connection was attempted is not a Video3D proxy server or Video3D simulation.
1262	QERR_NO_DEVICE_SIMULATION_LICENSE	You do not have a valid license for using third-party devices in normal simulation. To configure licensing use the Configure License utility found under Start Menu/All Programs/Quanser for your product.
1263	QERR_NO_HIL_PROXY	The connection to the HIL simulation or HIL Proxy Server was refused. If using a simulated device, make sure the simulation is running.
1264	QERR_PRODUCT_NOT_IN_LICENSE_FILE	The product code specified could not be found in the license file.
1265	QERR_BUFFER_MODE_NOT_SUPPORTED	The specified buffer mode is not supported.
1266	QERR_MISSING_FORMAT_SPECIFIER	A format specifier is missing in the option template.
1267	QERR_INVALID_FORMAT_RESTRICTION	An invalid restriction on a format specifier was specified.
1268	QERR_INVALID_TIMER_SEMAPHORE	The timer semaphore passed as an argument is invalid.
1269	QERR_NOT_VIDEO_PROXY	The server to which a connection was attempted is not a Video proxy server or Video simulation.
1270	QERR_SAMPLES_LOST	Samples were lost or corrupted because the device cannot keep up. The sampling frequency is too fast or too many samples have been requested. Try fewer samples or a slower sampling frequency.
1271	QERR_QARM_COMM_FAILURE_J0	Communication to the Yaw motor has been lost or corrupted. Please power cycle the arm and contact your local Quanser support team if the issue continues.
1272	QERR_QARM_COMM_FAILURE_J1_MASTER	Communication to the Master Shoulder motor has been lost or corrupted. Please power cycle the arm and contact your local Quanser support team if the issue continues.
1273	QERR_QARM_COMM_FAILURE_J1_SLAVE	Communication to the Slave Shoulder motor has been lost or corrupted. Please power cycle the arm and contact your local Quanser support team if the issue continues.
1274	QERR_QARM_COMM_FAILURE_J2	Communication to the Elbow motor has been lost or corrupted. Please power cycle the arm and contact your local Quanser support team if the issue continues.
1275	QERR_QARM_COMM_FAILURE_J3	Communication to the Wrist motor has been lost or corrupted. Please power cycle the arm and contact your local Quanser support team if the issue continues.
1276	QERR_QARM_COMM_FAILURE_END_EFFECTOR	Communication to the End Effector board has been lost or corrupted. Please turn off the arm device and check the cable connection.
1277	QERR_QARM_COMM_FAILURE_GRIPPER	Communication to the Gripper motor has been lost or corrupted. Please turn off the arm device and check the motor's cable connection.
1278	QERR_QARM_OVERHEATING_J0	Internal temperature of the Yaw motor has exceeded the configured operating temperature. Please turn off the arm and allow the motor to cool for at least 20 minutes.
1279	QERR_QARM_OVERHEATING_J1_MASTER	Internal temperature of the Master Shoulder motor has exceeded the configured operating temperature. Please turn off the arm and allow the motor to cool for at least 20 minutes.
1280	QERR_QARM_OVERHEATING_J1_SLAVE	Internal temperature of the Slave Shoulder motor has exceeded the configured operating temperature. Please turn off the arm and allow the motor to cool for at least 20 minutes.
1281	QERR_QARM_OVERHEATING_J2	Internal temperature of the Elbow motor has exceeded the configured operating temperature. Please turn off the arm and allow the motor to cool for at least 20 minutes.
1282	QERR_QARM_OVERHEATING_J3	Internal temperature of the Wrist motor has exceeded the configured operating temperature. Please turn off the arm and allow the motor to cool for at least 20 minutes.
1283	QERR_QARM_OVERHEATING_GRIPPER	Internal temperature of the Gripper motor has exceeded the configured operating temperature. Please turn off the arm and allow the motor to cool for at least 20 minutes.
1284	QERR_QARM_OVERLOAD_J0	Detected a persistent load that exceeded the maximum output rating of the Yaw motor. Please turn off the arm and apply a lighter load to the motor.
1285	QERR_QARM_OVERLOAD_J1_MASTER	Detected a persistent load that exceeded the maximum output rating of the Master Shoulder motor. Please turn off the arm and apply a lighter load to the motor.
1286	QERR_QARM_OVERLOAD_J1_SLAVE	Detected a persistent load that exceeded the maximum output rating of the Slave Shoulder motor. Please turn off the arm and apply a lighter load to the motor.
1287	QERR_QARM_OVERLOAD_J2	Detected a persistent load that exceeded the maximum output rating of the Elbow motor. Please turn off the arm and apply a lighter load to the motor.
1288	QERR_QARM_OVERLOAD_J3	Detected a persistent load that exceeded the maximum output rating of the Wrist motor. Please turn off the arm and apply a lighter load to the motor.
1289	QERR_QARM_OVERLOAD_GRIPPER	Detected a persistent load that exceeded the maximum output rating of the Gripper motor. Please turn off the arm and apply a lighter load to the motor.
1290	QERR_QARM_MOTOR_ENCODER_J0	Detected a malfunction of the Yaw motor's encoder. Please contact your local Quanser support team.
1291	QERR_QARM_MOTOR_ENCODER_J1_MASTER	Detected a malfunction of the Master Shoulder motor's encoder. Please contact your local Quanser support team.
1292	QERR_QARM_MOTOR_ENCODER_J1_SLAVE	Detected a malfunction of the Slave Shoulder motor's encoder. Please contact your local Quanser support team.
1293	QERR_QARM_MOTOR_ENCODER_J2	Detected a malfunction of the Elbow motor's encoder. Please contact your local Quanser support team.
1294	QERR_QARM_MOTOR_ENCODER_J3	Detected a malfunction of the Wrist motor's encoder. Please contact your local Quanser support team.
1295	QERR_QARM_MOTOR_ENCODER_GRIPPER	Detected a malfunction of the Gripper motor's encoder. Please contact your local Quanser support team.
1296	QERR_QARM_ELECTRICAL_SHOCK_J0	Detected an electrical shock on the Yaw motor's circuit or insufficient power to operate the motor. Please power cycle the arm and contact your local Quanser support team if the issue continues.
1297	QERR_QARM_ELECTRICAL_SHOCK_J1_MASTER	Detected an electrical shock on the Master Shoulder motor's circuit or insufficient power to operate the motor. Please power cycle the arm and contact your local Quanser support team if the issue continues.
1298	QERR_QARM_ELECTRICAL_SHOCK_J1_SLAVE	Detected an electrical shock on the Slave Shoulder motor's circuit or insufficient power to operate the motor. Please power cycle the arm and contact your local Quanser support team if the issue continues.
1299	QERR_QARM_ELECTRICAL_SHOCK_J2	Detected an electrical shock on the Elbow motor's circuit or insufficient power to operate the motor. Please power cycle the arm and contact your local Quanser support team if the issue continues.
1300	QERR_QARM_ELECTRICAL_SHOCK_J3	Detected an electrical shock on the Wrist motor's circuit or insufficient power to operate the motor. Please power cycle the arm and contact your local Quanser support team if the issue continues.
1301	QERR_QARM_ELECTRICAL_SHOCK_GRIPPER	Detected an electrical shock on the Gripper motor's circuit or insufficient power to operate the motor. Please power cycle the arm and contact your local Quanser support team if the issue continues.
1302	QERR_QARM_INPUT_VOLTAGE_J0	Input voltage of the Yaw motor exceeded the configured operating voltage. Please power cycle the arm and contact your local Quanser support team if the issue continues.
1303	QERR_QARM_INPUT_VOLTAGE_J1_MASTER	Input voltage of the Master Shoulder motor exceeded the configured operating voltage. Please power cycle the arm and contact your local Quanser support team if the issue continues.
1304	QERR_QARM_INPUT_VOLTAGE_J1_SLAVE	Input voltage of the Slave Shoulder motor exceeded the configured operating voltage. Please power cycle the arm and contact your local Quanser support team if the issue continues.
1305	QERR_QARM_INPUT_VOLTAGE_J2	Input voltage of the Elbow motor exceeded the configured operating voltage. Please power cycle the arm and contact your local Quanser support team if the issue continues.
1306	QERR_QARM_INPUT_VOLTAGE_J3	Input voltage of the Wrist motor exceeded the configured operating voltage. Please power cycle the arm and contact your local Quanser support team if the issue continues.
1307	QERR_QARM_INPUT_VOLTAGE_GRIPPER	Input voltage of the Gripper motor exceeded the configured operating voltage. Please power cycle the arm and contact your local Quanser support team if the issue continues.
1308	QERR_PDU_SIZE_TOO_SMALL	The protocol data unit (PDU) is too small to handle the data required.
1309	QERR_CANNOT_NEGOTIATE_PDU	Unable to negotiate protocol data unit (PDU) size.
1310	QERR_JOB_PENDING	A job is already pending.
1311	QERR_TOO_MANY_VARIABLES	There are too may items (>20) in multivariable read/write.
1312	QERR_PDU_TOO_SMALL	The total data exceeds the PDU size.
1313	QERR_INVALID_PLC_ANSWER	The PLC returned an invalid answer.
1314	QERR_CANNOT_START_PLC	The PLC could not be started.
1315	QERR_PLC_ALREADY_RUN	The PLC is already running.
1316	QERR_CANNOT_STOP_PLC	The PLC canot be stopped.
1317	QERR_CANNOT_COPY_RAM_TO_ROM	Cannot copy RAM to ROM.
1318	QERR_CANNOT_COMPRESS	Cannot compress.
1319	QERR_PLC_ALREADY_STOPPED	The PLC has already been stopped.
1320	QERR_UPLOAD_FAILED	The upload sequence failed.
1321	QERR_INVALID_DATA_SIZE_RECEIVED	Invalid data size received.
1322	QERR_INVALID_BLOCK_TYPE	Invalid block type.
1323	QERR_INVALID_BLOCK_NUMBER	Invalid block number.
1324	QERR_INVALID_BLOCK_SIZE	Invalid block size.
1325	QERR_DOWNLOAD_FAILED	Download sequence failed.
1326	QERR_BLOCK_INSERT_REFUSED	Block insert refused.
1327	QERR_BLOCK_DELETE_REFUSED	Block delete refused.
1328	QERR_INVALID_PASSWORD	Invalid password.
1329	QERR_NO_PASSWORD_TO_SET_OR_CLEAR	No password to set or clear.
1330	QERR_FUNCTION_REFUSED	Function refused by CPU (Unknown error).
1331	QERR_DESTROYING_OBJECT	Cannot perform the operation. Object is being destroyed.
1332	QERR_CANNOT_CHANGE_PARAMETER	The parameter cannot be changed at the present time.
1333	QERR_ILLEGAL_MULTIBYTE_CHARACTER	An illegal multi-byte character was encountered in the stream.
1334	QERR_ILLEGAL_SURROGATE_CHARACTER	An illegal surrogate character was encountered in the stream.
1335	QERR_ILLEGAL_CONTROL_CHARACTER	An illegal control character was encountered in the stream.
1336	QERR_ILLEGAL_NON_CHARACTER	An illegal non-character was encountered in the stream.
1337	QERR_MISSING_END_TAG_NAME	Missing end tag name e.g. </>.
1338	QERR_UNEXPECTED_NULL_CHARACTER	Unexpected null character in the input stream.
1339	QERR_UNEXPECTED_QUESTION_MARK	Unexpected question mark in the input stream.
1340	QERR_END_BEFORE_TAG	End of input stream encountered before tag name.
1341	QERR_END_IN_TAG	End of input stream encountered within tag name.
1342	QERR_INVALID_FIRST_CHARACTER_OF_NAME	Invalid first character of tag name.
1343	QERR_INVALID_ARRAY_ELEMENT_SEPARATOR	Invalid array element separator when parsing.
1344	QERR_FAILED_TO_PARSE_INTEGER	Failed to parse an integer value in a string. Format is incorrect.
1345	QERR_FAILED_TO_PARSE_REAL_NUMBER	Failed to parse a real value in a string. Format is incorrect.
1346	QERR_MATRIX_NOT_INVERTIBLE	The matrix is not invertible.
1347	QERR_FORCE_TORQUE_SENSOR_DISCONNECTED	The force/torque sensor appears to be disconnected.
1348	QERR_END_QUOTE_EXPECTED	The ending quote for a string was expected.
1349	QERR_TEXT_MATRICES_NOT_SUPPORTED	Text matrices are not currently supported.
1350	QERR_SPARSE_MATRICES_NOT_SUPPORTED	Sparse matrices are not currently supported.
1351	QERR_MATRIX_TYPE_NOT_RECOGNIZED	The matrix type of the MAT-file was not recognized. File may be corrupt.
1352	QERR_VARIABLE_NOT_FOUND	The requested variable could not be found.
1353	QERR_COMPLEX_NUMBERS_NOT_SUPPORTED	Complex numbers are not currently supported.
1354	QERR_BYTE_ORDER_NOT_SUPPORTED	The specified byte order is not supported. For example, VAX and Cray byte ordering is not supported.
1355	QERR_NUMBER_OF_ROWS_TOO_SMALL	The number of rows of the matrix in the file is too small for the total rows implied by the parameters.
1356	QERR_NUMBER_OF_COLUMNS_TOO_SMALL	The number of columns of the matrix in the file is too small for the total columns implied by the parameters.
1357	QERR_INVALID_I2C_TIMING_CONFIG	Could not configure the I2C timing registers to the specified clock frequency. Please try using a different I2C clock frequency.
1358	QERR_IMU_HARDWARE_ERROR	The IMU is not responding properly. Please check the hardware. If necessary, the IMU may be disabled in the card-specific options, in which case the IMU outputs will be zero.
1359	QERR_CONFLICTING_DIGITAL_FUNCTIONS	The special purpose function (e.g. PWM, Encoder, SPI, I2C, UART) pins are already configured for Digital I/O. Please remove the appropriate Digital I/O channels inside the HIL Initialize block in order to use the specified function. Refer to the device help page for pinout diagrams.
1360	QERR_ANALOG_OUTPUT_IS_NAN	An attempt was made to write an analog output value that is Not-a-Number (NaN).
1361	QERR_PWM_OUTPUT_IS_NAN	An attempt was made to write a PWM output value that is Not-a-Number (NaN).
1362	QERR_OTHER_OUTPUT_IS_NAN	An attempt was made to write an other output value that is Not-a-Number (NaN).
1363	QERR_DOUBLE_PROPERTY_IS_NAN	An attempt was made to set a double property to a value that is Not-a-Number (NaN).
1364	QERR_PWM_FREQUENCY_IS_NAN	An attempt was made to set the PWM frequency to a value that is Not-a-Number (NaN).
1365	QERR_PWM_DUTY_CYCLE_IS_NAN	An attempt was made to set the PWM duty cycle to a value that is Not-a-Number (NaN).
1366	QERR_PWM_DEADBAND_IS_NAN	An attempt was made to set the PWM deadband to a value that is Not-a-Number (NaN).
1367	QERR_CLOCK_FREQUENCY_IS_NAN	An attempt was made to set the clock frequency to a value that is Not-a-Number (NaN).
1368	QERR_ENCODER_FILTER_FREQUENCY_IS_NAN	An attempt was made to set the encoder filter frequency to a value that is Not-a-Number (NaN).
1369	QERR_TOO_MANY_POINTS	There are too many points specified for the algorithm to process. Resource or computation limits would be exceeded.
1370	QERR_STACK_OVERFLOW	An internal stack overflowed.
1371	QERR_STACK_UNDERFLOW	An internal stack underflowed.
1372	QERR_NO_REFERENCE_SCAN	No reference scan has been set. A scan match cannot be performed.
1373	QERR_INVALID_SCAN	No valid points were found in the scan.
1374	QERR_THEME_INCOMPATIBLE_WITH_DECOLORIZATION	The selected colorization theme is incompatible with decolorization. Please choose a different theme.
1375	QERR_DYNAMIXEL_FAILED_TO_INITIALIZE	The Dynamixel OpenManipulator X failed to initialize. Make sure the Dynamixel OpenManipulator X is plugged in and powered.
1376	QERR_DYNAMIXEL_COMMUNICATION_ERROR	Could not communicate with Dynamixel OpenManipulator X.
1377	QERR_DYNAMIXEL_COULD_NOT_OPEN_DEVICE	Could not open the Dynamixel OpenManipulator X device.
1378	QERR_DYNAMIXEL_COULD_NOT_START_DEVICE	Could not start the Dynamixel OpenManipulator X control loop.
1379	QERR_DYNAMIXEL_COULD_NOT_CREATE_READ_GROUP	Could not create a read group for the Dynamixel OpenManipulator X.
1380	QERR_DYNAMIXEL_COULD_NOT_CREATE_WRITE_GROUP	Could not create a write group for the Dynamixel OpenManipulator X.
1381	QERR_DYNAMIXEL_COULD_NOT_CHANGE_WRITE_GROUP	Could not change parameters of a write group for the Dynamixel OpenManipulator X.
1382	QERR_DYNAMIXEL_INVALID_GOAL_PWM	The goal PWM for the Dynamixel OpenManipulator X device is out of range.
1383	QERR_DYNAMIXEL_INVALID_GOAL_POSITION	The goal Position for the Dynamixel OpenManipulator X device is out of range.
1384	QERR_DYNAMIXEL_INVALID_GAINS	The position PID or feedforward gains for the Dynamixel OpenManipulator X device is out of range.
1385	QERR_DYNAMIXEL_INVALID_PROFILE_PARAMS	The profile velocity or acceleration parameters for the Dynamixel OpenManipulator X device is out of range.
1386	QERR_CANNOT_CONNECT_TO_PLC	It was not possible to connect to the specified PLC. It is likely unreachable.
1387	QERR_FILE_ALREADY_EXISTS	The file already exists and cannot be overwritten. Delete the file first.
1388	QERR_TOO_MANY_TELEMETRY	There are too many telemetry bits set in DSHOT commands. When multiple ESC channels share a single telemetry line, only one channel may perform a telemetry request at one time.
1389	QERR_DIGITAL_EXPIRATION_STATE_NOT_UNCHANGED	This board does not support setting the expiration state of all digital outputs. Set digital outputs which are not controlled by the watchdog to 3 (no change).
1390	QERR_VARIABLE_STEP_SOLVERS_NOT_SUPPORTED	Variable-step solvers are not supported by this block.
1391	QERR_INVALID_NEWLINE_SEPARATED_STRING	The initialization string is invalid. A single string containing items separated by newlines (\n) is expected.
1392	QERR_SENSOR_TYPE_NOT_SUPPORTED	The specified sensor type is not currently supported.
1393	QERR_MISSING_SPINNAKER	The Spinnaker SDK does not appear to be installed or is not in the PATH. See the help for the GenICam capture block for the installation requirements. Note that a reboot may be required after installing the SDK.
1394	QERR_GENICAM_CANNOT_INITIALIZE_CAMERA	An error occurred while attempting to initialize the GenICam camera.
1395	QERR_GENICAM_CANNOT_GET_FEATURES	An error occurred while attempting to get features from the GenICam camera.
1396	QERR_GENICAM_CANNOT_READ_NODE	An error occurred while attempting to read nodes from the GenICam camera.
1397	QERR_GENICAM_CANNOT_WRITE_NODE	An error occurred while attempting to write nodes to the GenICam camera.
1398	QERR_GENICAM_CANNOT_FIND_CAMERA	The requested GenICam camera cannot be found.
1399	QERR_GENICAM_CANNOT_GET_CAMERA_NODE	The requested GenICam camera nodemap cannot be acquired.
1400	QERR_GENICAM_CANNOT_SET_IMAGE_SIZE	Cannot set GenICam camera image to the desired size.
1401	QERR_GENICAM_CANNOT_SET_PIXEL_FORMAT	Cannot set GenICam camera image to the desired pixel format.
1402	QERR_GENICAM_CANNOT_SET_ANALOG_CONTROL	Cannot set GenICam camera analog controls to desired value.
1403	QERR_GENICAM_CANNOT_SET_ACQUISITION_NODE	Cannot set GenICam camera acquisition mode.
1404	QERR_GENICAM_CANNOT_GRAB_IMAGE	An error occurred while attempting to grab an image using the GenICam camera.
1405	QERR_GENICAM_GRAB_IMAGE_TIMEOUT	A timeout occurred while attempting to grab an image using the GenICam camera.
1406	QERR_GENICAM_CANNOT_CLOSE	An error occurred while attempting to close the GenICam camera.
1407	QERR_CONTINUOUS_THRESHOLD_EXCEEDS_PEEK	The specified continuous threshold exceeds the peak threshold.
1408	QERR_PEER_CLOSED_CONNECTION	The connection was closed by the peer. The stream should be closed.
1409	QERR_USB_CANNOT_GET_CONFIG_DESCRIPTOR	Cannot get the device's USB configuration descriptor. Try power cycle the device or use another USB port.
1410	QERR_USB_CANNOT_CLAIM_INTERFACE	Cannot claim the device's USB interface. Try power cycle the device or use another USB port.
1411	QERR_USB_CANNOT_INITIALIZE	USB library cannot be initialized. Try power cycle the device or use another USB port.
1412	QERR_USB_CANNOT_FIND_DEVICE	Cannot find the USB device. Make sure the device is connected and powered (if it's a powered device).
1413	QERR_USB_CANNOT_OPEN_DEVICE	Cannot open the device. Try power cycle the device or use another USB port.
1414	QERR_USB_CANNOT_GET_ENDPOINT	Cannot get device's USB endpoint. Try power cycle the device or use another USB port.
1415	QERR_USB_INCOMPATIBLE_CONFIG_DESCRIPTOR	The config descriptor is not compatible. Try power cycle the device or use another USB port.
1416	QERR_NOISE_ERROR	A noise error occurred
1417	QERR_OVERRUN_ERROR	An overrun error occurred
1418	QERR_CARD_SPECIFIC_OPTION_VALUE_INVALID	The value of a card specific option specified is invalid.
1419	QERR_INVALID_BYTE_COUNT_DIGIT	The byte count contains an invalid hexadecimal digit.
1420	QERR_INVALID_ADDRESS_DIGIT	The address contains an invalid hexadecimal digit.
1421	QERR_INVALID_RECORD_TYPE_DIGIT	The record type contains an invalid hexadecimal digit.
1422	QERR_UNRECOGNIZED_RECORD_TYPE	The record type is unrecognized.
1423	QERR_INVALID_DATA_DIGIT	The data contains an invalid hexadecimal digit.
1424	QERR_INVALID_CHECKSUM_DIGIT	The checksum contains an invalid hexadecimal digit.
1425	QERR_INVALID_END_OF_FILE_RECORD_LENGTH	The end-of-file record has a non-zero byte count.
1426	QERR_INVALID_SEGMENT_ADDRESS_LENGTH	The extended segment address record has a byte count other than 2.
1427	QERR_INVALID_START_SEGMENT_LENGTH	The start segment address record has a byte count other than 4 or an address other than zero.
1428	QERR_INVALID_LINEAR_ADDRESS_LENGTH	The extended linear address record has a byte count other than 2.
1429	QERR_INVALID_START_LINEAR_LENGTH	The start linear address record has a byte count other than 4 or an address other than zero.
1430	QERR_INVALID_FLASH_FORMAT	Invalid flash file format.
1431	QERR_DISPLAY_NOT_IN_GRAPHICS_MODE	The display is not in graphics mode. Re-open the display in graphics mode.
1432	QERR_DISPLAY_NOT_IN_TEXT_MODE	The display is not in text mode. Re-open the display in text mode.
1433	QERR_VRPN_INVALID_DEVICE_READ_CHANNEL_SETTING	The read operation setting for VRPN devices is incorrect. Each device must have its read operation configured, and the channel/sensor to read must be less than the number of channel/sensor for that device.
1434	QERR_VRPN_INVALID_DEVICE_READ_OPERATION	The requested read operation on VRPN devices is invalid. Make sure the number of requested channels/sensors match with how the devices are configured.
1435	QERR_LICENSE_MANAGER_NOT_INSTALLED	The Quanser license manager is not installed.
1436	QERR_LICENSE_MANAGER_NOT_RUNNING	The Quanser license manager is not running.
1437	QERR_SERIAL_NUMBER_NOT_FOUND	A board with the given serial number could not be found, either because none of the boards have that serial number or the board is already open.